RLR07C1001GSR93 Equivalent & Substitute Parts

Part Overview

The RLR07C1001GSR93 is a 1 kOhms ±2% 0.25W axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The component is actively produced and maintained in inventory. Substitute parts are identified to provide alternative sourcing options when the primary packaging format (Tape & Reel) is unavailable or when alternative distribution methods are required.

Substiute Parts

RLR07C1001GSR93

Vishay DaleIn Stock: 1026RLR07C1001GSR93 Datasheet

Current PartRFQ

RLR07C1001GSRE6

Vishay DaleIn Stock: 3579RLR07C1001GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR07C1001GSRE6 qualifies as a parametric equivalent to the RLR07C1001GSR93 based on the following criteria:

• Identical resistance value: 1 kOhms
• Identical tolerance: ±2%
• Identical power rating: 0.25W (1/4W)
• Identical composition: Metal Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 150°C
• Identical package type: Axial
• Identical physical dimensions: 0.090" Dia x 0.250" L (2.29mm x 6.35mm)
• Identical military series: MIL-PRF-39017/01, RLR07
• Identical failure rate: S (0.001%)

The primary difference between these parts is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both are manufactured by Vishay Dale and maintain identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C1001GSR93 and RLR07C1001GSRE6 are active products from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and supply chain availability. The RLR07C1001GSR93 in Tape & Reel format is suitable for automated assembly processes requiring continuous reel feeding. The RLR07C1001GSRE6 in Cut Tape format accommodates manual assembly, kit builds, or lower-volume production runs. Both parts maintain identical compliance status (RoHS non-compliant, REACH Affected) and military-grade reliability ratings.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1001GSRE6 be used as a direct replacement for RLR07C1001GSR93?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Substitution is valid for any application where the packaging format does not impose assembly constraints.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous reels suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging supplies components on tape segments, typically used for manual assembly, prototyping, or lower-volume production. Both formats contain identical components.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts share identical resistance values, tolerances, temperature coefficients, operating temperature ranges, and failure rates. Electrical performance is equivalent.

Q: Do both parts meet the same military specifications?

A: Yes. Both parts conform to MIL-PRF-39017/01 and are part of the RLR07 military-grade resistor series with identical failure rate classifications.

Q: What compliance considerations apply to these parts?

A: Both parts are RoHS non-compliant and REACH Affected. Compliance requirements must be evaluated against specific application and regional regulations.