RLR07C1001GSK36 Equivalent & Substitute Parts

Part Overview

The RLR07C1001GSK36 is a 1 kOhms ±2% 0.25W axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The component is actively produced and maintained in inventory. Substitute parts are identified to provide alternative packaging and sourcing options while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

RLR07C1001GSK36

Vishay DaleIn Stock: 918RLR07C1001GSK36 Datasheet

Current PartRFQ

RLR07C1001GSRE6

Vishay DaleIn Stock: 3579RLR07C1001GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RLR07C1001GSK36 is determined by the following electrical and mechanical parameters:

• Resistance value: 1 kOhms
• Tolerance: ±2%
• Power rating: 0.25W
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Physical dimensions: 0.090" Dia x 0.250" L
• Military series compliance: MIL-PRF-39017/01, RLR07
• Failure rate classification: S (0.001%)

The identified substitute part maintains all electrical specifications and physical dimensions. The primary difference is the packaging format, which does not affect component performance or circuit functionality.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C1001GSK36 and RLR07C1001GSRE6 are active products from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and inventory availability:

The RLR07C1001GSK36 is supplied in Tape & Reel (TR) format, suitable for automated assembly processes and high-volume production environments. The RLR07C1001GSRE6 is supplied in Cut Tape (CT) format, appropriate for manual assembly, prototyping, and lower-volume applications.

Both components maintain MIL-PRF-39017/01 military specifications, identical failure rate classification, and equivalent compliance status. The choice between these parts does not affect circuit performance or reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1001GSRE6 be used as a direct replacement for RLR07C1001GSK36?

A: Yes. Both parts are electrically and mechanically identical. The only difference is the packaging format (Tape & Reel versus Cut Tape). Circuit performance and reliability are unaffected by this packaging difference.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is used for automated pick-and-place assembly equipment. Cut Tape (CT) packaging consists of individual components cut from the tape, suitable for manual assembly or small-quantity applications. Both formats contain the same component.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts have identical resistance value (1 kOhms), tolerance (±2%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 150°C).

Q: Do both parts meet the same military specifications?

A: Yes. Both parts comply with MIL-PRF-39017/01 and are classified as military-grade components with identical failure rate specifications (S, 0.001%).

Q: What is the inventory status for each part?

A: RLR07C1001GSK36 has 864 pieces in stock. RLR07C1001GSRE6 has 3474 pieces in stock. Availability may vary based on current demand and supply conditions.