RLR07C1001FSRE5 Equivalent & Substitute Parts

Part Overview

The RLR07C1001FSRE5 is a 1 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade MIL-PRF-39017/01 specification, this component features moisture resistance and weldability suitable for military applications. The part is currently active in production with 828 units in stock. Substitute parts may be required due to packaging format availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RLR07C1001FSRE5

Vishay DaleIn Stock: 857RLR07C1001FSRE5 Datasheet

Current PartRFQ

RLR07C1001FSRE6

Vishay DaleIn Stock: 1971RLR07C1001FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR07C1001FSRE5 and its substitute RLR07C1001FSRE6 are electrically and mechanically identical across all critical parameters: resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, package type, physical dimensions, and military series designation. The sole distinction between these parts is packaging format: RLR07C1001FSRE5 is supplied in Tape & Reel (TR) format, while RLR07C1001FSRE6 is supplied in Cut Tape (CT) format. Both parts maintain the same base product number RLR07 and identical failure rate specification. Substitution is valid when packaging format requirements permit the alternative delivery method.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C1001FSRE5 and RLR07C1001FSRE6 are active production parts from Vishay Dale with identical electrical specifications and military-grade certification under MIL-PRF-39017/01. Selection between these parts depends solely on packaging format requirements. The Tape & Reel format (RLR07C1001FSRE5) is suitable for automated assembly processes, while the Cut Tape format (RLR07C1001FSRE6) accommodates manual assembly or lower-volume applications. Both parts share identical RoHS non-compliant and REACH Affected compliance status. Component selection should be based on assembly methodology and procurement availability rather than electrical performance, as both parts are functionally equivalent.

Frequently Asked Questions (FAQ)

Q: Are RLR07C1001FSRE5 and RLR07C1001FSRE6 electrically interchangeable?

A: Yes. Both parts have identical resistance (1 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 150°C). Electrical performance is equivalent.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) format supplies components on continuous tape wound on reels, suitable for high-speed automated pick-and-place assembly. Cut Tape (CT) format supplies components on tape segments, suitable for manual assembly or lower-volume production runs.

Q: Can I substitute RLR07C1001FSRE6 for RLR07C1001FSRE5 in my design?

A: Substitution is valid if your assembly process accommodates Cut Tape packaging. The physical dimensions, electrical characteristics, and military specifications are identical. Verify that your procurement and assembly workflow supports the alternative packaging format.

Q: Do both parts meet the same military specifications?

A: Yes. Both parts are manufactured to MIL-PRF-39017/01 specification and carry the same failure rate classification S (0.001%). Military qualification and performance requirements are identical.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS non-compliant and REACH Affected. Compliance status is identical between the two part numbers.