RLR07C1001FSR36 Equivalent & Substitute Parts

Part Overview

The RLR07C1001FSR36 is a 1 kOhms ±1% 0.25W through-hole resistor manufactured by Vishay Dale, featuring metal film construction with military-grade specifications per MIL-PRF-39017/01. This component is designed for applications requiring moisture resistance, weldability, and reliable performance across extended temperature ranges. The part maintains active product status with 678 units available in tape and reel packaging. Substitute parts are identified when packaging format changes or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

RLR07C1001FSR36

Vishay DaleIn Stock: 774RLR07C1001FSR36 Datasheet

Current PartRFQ

RLR07C1001FSRE6

Vishay DaleIn Stock: 1971RLR07C1001FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C1001FSR36 is determined by strict equivalence across all electrical parameters and mechanical form factor. The following parameters must remain identical for valid substitution:

• Resistance value: 1 kOhms
• Tolerance: ±1%
• Power rating: 0.25W
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Axial package configuration
• Physical dimensions: 0.090" Dia x 0.250" L
• Military series designation: MIL-PRF-39017/01, RLR07
• Failure rate classification: S (0.001%)

The identified substitute part RLR07C1001FSRE6 maintains complete electrical and mechanical equivalence. The only distinction is packaging format: the main part is supplied in tape and reel (TR) configuration, while the substitute is available in cut tape (CT) format. Both parts share identical component specifications and performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C1001FSR36 and RLR07C1001FSRE6 are active products from Vishay Dale with identical electrical performance and military-grade specifications. Selection between these parts should be based on packaging requirements and supply chain considerations.

The RLR07C1001FSR36 in tape and reel format is suitable for high-volume automated assembly operations. The RLR07C1001FSRE6 in cut tape format accommodates lower-volume applications or manual assembly processes. Both parts comply with MIL-PRF-39017/01 military standards and maintain equivalent reliability metrics. RoHS non-compliance status is identical across both variants. REACH and ECCN classifications remain consistent, supporting equivalent regulatory compliance for applications requiring military-specification resistors.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1001FSRE6 be used as a direct replacement for RLR07C1001FSR36?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: tape and reel versus cut tape. Substitution is valid for any application where the packaging format change does not conflict with assembly equipment or procurement specifications.

Q: What is the difference between tape and reel (TR) and cut tape (CT) packaging?

A: Tape and reel packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut tape packaging provides components on individual tape segments, typically used for lower-volume builds or manual assembly. Both formats contain the same component with identical specifications.

Q: Are the electrical characteristics identical between these parts?

A: Yes. Resistance value, tolerance, power rating, temperature coefficient, operating temperature range, and failure rate are identical. Both parts meet MIL-PRF-39017/01 military specifications.

Q: What factors should determine which substitute part to select?

A: Selection should be based on assembly process requirements (automated versus manual), production volume, and inventory availability. The RLR07C1001FSR36 supports high-volume automated assembly, while RLR07C1001FSRE6 accommodates lower-volume or manual assembly workflows.

Q: Do both parts have the same physical dimensions?

A: Yes. Both parts measure 0.090" diameter by 0.250" length (2.29mm x 6.35mm) in axial configuration, ensuring identical PCB footprint and mounting compatibility.