RLR07C1000FSRE5 Equivalent & Substitute Parts

Part Overview

The RLR07C1000FSRE5 is a 100 Ohm ±1% 0.25W through-hole axial resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The part is currently active in production with 697 pieces available in stock. Substitute parts are identified to address packaging format availability and inventory requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RLR07C1000FSRE5

Vishay DaleIn Stock: 758RLR07C1000FSRE5 Datasheet

Current PartRFQ

RLR07C1000FSRE6

Vishay DaleIn Stock: 1709RLR07C1000FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C1000FSRE5 is determined by the following critical parameters:

• Resistance value: 100 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package type: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Physical dimensions: 0.090" Dia x 0.250" L (2.29mm x 6.35mm)
• Series compliance: MIL-PRF-39017/01, RLR07

The identified substitute part RLR07C1000FSRE6 maintains all electrical and mechanical parameters identical to the main part. The only difference is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both parts are from the same manufacturer base product line and meet identical military specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C1000FSRE5 and RLR07C1000FSRE6 are active production parts from Vishay Dale with identical electrical specifications and military compliance. Selection between these parts is determined by packaging requirements:

• RLR07C1000FSRE5 (Tape & Reel) is suitable for high-volume automated assembly processes
• RLR07C1000FSRE6 (Cut Tape) is suitable for lower-volume applications or manual assembly workflows

Both parts maintain RoHS non-compliant and REACH Affected status. Component selection should account for assembly equipment compatibility and procurement volume requirements rather than electrical performance, as both parts are functionally equivalent.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1000FSRE6 be used as a direct replacement for RLR07C1000FSRE5?

A: Yes. Both parts have identical electrical specifications (100 Ohms ±1%, 0.25W, metal film composition), mechanical dimensions (0.090" Dia x 0.250" L), temperature characteristics (±100ppm/°C, -65°C to 150°C operating range), and military series compliance (MIL-PRF-39017/01). The only difference is packaging format.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape wound on a reel, optimized for automated pick-and-place assembly. Cut Tape (CT) packaging supplies components on tape segments, suitable for manual handling or lower-volume assembly processes. Both formats contain identical components.

Q: Are there inventory considerations when selecting between these parts?

A: RLR07C1000FSRE5 (Tape & Reel) has 697 pieces in stock. RLR07C1000FSRE6 (Cut Tape) has 1607 pieces in stock. Availability may influence part selection based on project timeline and volume requirements.

Q: Do both parts meet the same military specifications?

A: Yes. Both RLR07C1000FSRE5 and RLR07C1000FSRE6 are part of the RLR07 series and comply with MIL-PRF-39017/01 military specifications. Both feature moisture resistance, weldability, and identical failure rate ratings (S, 0.001%).

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS non-compliant and REACH Affected. These compliance statuses are identical across both part numbers and should be considered in system-level compliance planning.