RLR07C1000FSR36 Equivalent & Substitute Parts

Part Overview

The RLR07C1000FSR36 is a 100 Ohm ±1% metal film axial through-hole resistor rated at 0.25W (1/4W), manufactured by Vishay Dale under the military specification MIL-PRF-39017/01. This component features moisture resistance and weldability, designed for military and high-reliability applications operating across -65°C to 150°C. The part is currently active in production with 1052 pieces available in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility without circuit performance compromise.

Substiute Parts

RLR07C1000FSR36

Vishay DaleIn Stock: 1112RLR07C1000FSR36 Datasheet

Current PartRFQ

RLR07C1000FSRE6

Vishay DaleIn Stock: 1709RLR07C1000FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C1000FSR36 is determined by strict equivalence across all electrical and mechanical parameters. The primary differentiator between the main part and identified substitutes is packaging format. Both the main part (Tape & Reel format) and substitute part (Cut Tape format) maintain identical resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, physical dimensions, termination count, military specification compliance, and failure rate classification. The RLR07 series base product number confirms component family alignment. Packaging format selection depends on assembly process requirements and procurement volume, not circuit performance or reliability characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C1000FSR36 and RLR07C1000FSRE6 are active production components from Vishay Dale meeting MIL-PRF-39017/01 military specification requirements. Selection between these parts depends on assembly process requirements. The Tape & Reel format (RLR07C1000FSR36) suits automated pick-and-place assembly operations. The Cut Tape format (RLR07C1000FSRE6) accommodates manual assembly or lower-volume production runs. Both parts carry identical electrical performance, reliability ratings, and environmental operating specifications. RoHS non-compliance status applies uniformly across both options. REACH affected designation and EAR99 export classification are consistent. Inventory availability differs, with the Cut Tape variant currently showing higher stock levels (1607 pieces versus 1052 pieces).

Frequently Asked Questions (FAQ)

Q: Can RLR07C1000FSRE6 replace RLR07C1000FSR36 in circuit applications?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters including resistance value, tolerance, power rating, temperature coefficient, and operating temperature range. The only difference is packaging format (Cut Tape versus Tape & Reel).

Q: What determines substitution eligibility between these parts?

A: Substitution is valid when resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, physical dimensions, termination count, military specification compliance, and failure rate classification remain identical. Packaging format does not affect electrical performance or circuit compatibility.

Q: Does packaging format affect component reliability or performance?

A: No. Packaging format (Tape & Reel or Cut Tape) is a procurement and assembly consideration only. It does not influence electrical characteristics, reliability ratings, or environmental performance specifications.

Q: Are both parts suitable for military applications?

A: Yes. Both RLR07C1000FSR36 and RLR07C1000FSRE6 comply with MIL-PRF-39017/01 military specification and carry identical S-class (0.001%) failure rate ratings, qualifying them for military and high-reliability applications.

Q: Which packaging format should be selected for production?

A: Tape & Reel format (RLR07C1000FSR36) is standard for automated assembly lines. Cut Tape format (RLR07C1000FSRE6) is appropriate for manual assembly, prototyping, or lower-volume production where automated handling is not required.