RLR07C1000FSK36 Equivalent & Substitute Parts

Part Overview

The RLR07C1000FSK36 is a 100 Ohm ±1% metal film axial through-hole resistor rated at 0.25W (1/4W), manufactured by Vishay Dale. This component is part of the military-grade RLR07 series, compliant with MIL-PRF-39017/01 specifications. The part features moisture resistance and weldability, making it suitable for military and high-reliability applications. The component is currently in active production status with 785 pieces available in stock.

Substitute parts are identified when packaging configurations differ while maintaining identical electrical and mechanical specifications, allowing flexibility in procurement and assembly processes.

Substiute Parts

RLR07C1000FSK36

Vishay DaleIn Stock: 846RLR07C1000FSK36 Datasheet

Current PartRFQ

RLR07C1000FSRE6

Vishay DaleIn Stock: 1709RLR07C1000FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR07C1000FSRE6 qualifies as a parametric equivalent to the RLR07C1000FSK36 based on the following criteria:

Identical Electrical Parameters:

• Resistance value: 100 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C

Identical Mechanical Parameters:

• Composition: Metal Film
• Package type: Axial
• Physical dimensions: 0.090" Dia × 0.250" L (2.29mm × 6.35mm)
• Number of terminations: 2

Identical Compliance & Certification:

• Series: Military, MIL-PRF-39017/01, RLR07
• Failure rate: S (0.001%)
• Features: Military, Moisture Resistant, Weldable
• RoHS status: RoHS non-compliant
• REACH status: REACH Affected

Difference:

• Packaging configuration: RLR07C1000FSK36 supplied in Tape & Reel (TR); RLR07C1000FSRE6 supplied in Cut Tape (CT)

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C1000FSK36 and RLR07C1000FSRE6 are active production components from Vishay Dale's military-grade RLR07 series. Selection between these parts should be based on procurement and assembly requirements:

RLR07C1000FSK36 (Tape & Reel): Suitable for high-volume automated assembly operations where tape-and-reel packaging integrates directly with pick-and-place equipment.

RLR07C1000FSRE6 (Cut Tape): Suitable for lower-volume applications, manual assembly, or situations where smaller quantity increments are required.

Both parts maintain identical electrical performance, mechanical compatibility, and military compliance specifications. The choice between them does not affect circuit functionality or reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1000FSRE6 be used as a direct replacement for RLR07C1000FSK36?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging configuration (Cut Tape versus Tape & Reel). Circuit performance and reliability are unaffected by this substitution.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape wound on a reel, optimized for automated assembly. Cut Tape (CT) packaging supplies components on tape segments, suitable for manual assembly or lower-volume applications. Both formats contain the same component.

Q: Are both parts compliant with military specifications?

A: Yes. Both RLR07C1000FSK36 and RLR07C1000FSRE6 comply with MIL-PRF-39017/01 and are classified as military-grade components with identical failure rates and operating characteristics.

Q: Does packaging configuration affect component reliability?

A: No. Packaging configuration affects only handling and assembly processes. The electrical and mechanical properties of the resistor itself remain identical regardless of packaging format.

Q: Which part should be selected for new designs?

A: Selection should be based on assembly capability and procurement volume requirements. Both parts are active production items suitable for new designs. Tape & Reel is preferred for automated high-volume production; Cut Tape is preferred for manual assembly or lower volumes.