RLR05C2000FSBSL19 Equivalent & Substitute Parts

Part Overview

The RLR05C2000FSBSL19 is a 200 Ohm, ±1% tolerance, 1/8W (0.125W) through-hole axial resistor manufactured by Vishay Dale. This metal film resistor is designed for military applications per MIL-PRF-39017/05 specification and features moisture-resistant, weldable construction. The part is currently active in production with 922 units in stock. Substitute parts are identified when identical electrical and mechanical parameters are maintained across alternative manufacturing batches or packaging configurations.

Substiute Parts

RLR05C2000FSBSL19

Vishay DaleIn Stock: 1006RLR05C2000FSBSL19 Datasheet

Current PartRFQ

RLR05C2000FSB14

Vishay DaleIn Stock: 1133RLR05C2000FSB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR05C2000FSB14 is classified as a parametric equivalent to the RLR05C2000FSBSL19. Substitution is valid based on the following criteria:

• Identical resistance value: 200 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.125W (1/8W)
• Identical composition: Metal Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 150°C
• Identical package type: Axial
• Identical physical dimensions: 0.066" Dia x 0.150" L (1.68mm x 3.81mm)
• Identical termination count: 2
• Identical military series specification: MIL-PRF-39017/05, RLR05
• Identical failure rate classification: S (0.001%)

Both parts maintain the same electrical performance characteristics and mechanical compatibility for through-hole axial mounting applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR05C2000FSBSL19 and RLR05C2000FSB14 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability. The RLR05C2000FSB14 currently has higher stock levels (1060 units versus 922 units). Both parts carry RoHS non-compliant status and REACH Affected designation. Both are classified under ECCN EAR99 and HTSUS 8533.21.0090. For applications requiring military-grade specifications, either part satisfies MIL-PRF-39017/05 requirements.

Frequently Asked Questions (FAQ)

Q: Can RLR05C2000FSB14 be used as a direct replacement for RLR05C2000FSBSL19?

A: Yes. Both parts are identical in resistance value (200 Ohms), tolerance (±1%), power rating (1/8W), composition (metal film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 150°C), package type (axial), physical dimensions (0.066" Dia x 0.150" L), and military series specification (MIL-PRF-39017/05). Direct substitution is valid for through-hole axial mounting applications.

Q: Are there any differences in compliance or certification between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090). Compliance profiles are equivalent.

Q: What determines substitutability for this resistor category?

A: Substitutability is determined by matching resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, package type, physical dimensions, and military specification compliance. All these parameters are identical between the main part and substitute.

Q: Does package configuration affect compatibility?

A: No. Both parts use identical axial through-hole packaging with the same physical dimensions (0.066" Dia x 0.150" L / 1.68mm x 3.81mm). PCB layout and mounting procedures remain unchanged.

Q: Are both parts suitable for military applications?

A: Yes. Both parts conform to MIL-PRF-39017/05 specification and carry the same failure rate classification (S, 0.001%). Both feature moisture-resistant, weldable metal film construction for military-grade reliability.