RLR05C1002FSRE7 Equivalent & Substitute Parts

Part Overview

The RLR05C1002FSRE7 is a 10 kOhms ±1% 0.125W axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/05 specifications. The part is currently active in production with 1065 units in stock. Substitute parts are necessary when tape and reel packaging is unavailable or when alternative packaging formats are required for specific assembly processes.

Substiute Parts

RLR05C1002FSRE7

Vishay DaleIn Stock: 1090RLR05C1002FSRE7 Datasheet

Current PartRFQ

RLR05C1002FSRE5

Vishay DaleIn Stock: 1447RLR05C1002FSRE5 Datasheet

Parametric EquivalentRFQ

RLR05C1002FSRE6

Vishay DaleIn Stock: 2148RLR05C1002FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR05C1002FSRE7 has two parametric equivalents: RLR05C1002FSRE5 and RLR05C1002FSRE6. These substitutes are qualified based on the following criteria:

• Identical resistance value: 10 kOhms
• Identical tolerance: ±1%
• Identical power rating: 0.125W (1/8W)
• Identical composition: Metal Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 150°C
• Identical package type: Axial
• Identical physical dimensions: 0.066" Dia x 0.150" L (1.68mm x 3.81mm)
• Identical series specification: Military, MIL-PRF-39017/05, RLR05
• Identical failure rate: S (0.001%)

The primary difference between these parts is packaging format: the main part uses Tape & Reel (TR) packaging, while the substitutes use Cut Tape (CT) packaging. All other electrical and mechanical parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RLR05C1002FSRE7, RLR05C1002FSRE5, and RLR05C1002FSRE6—are active products from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability:

• RLR05C1002FSRE7 is specified for automated assembly processes requiring tape and reel packaging.
• RLR05C1002FSRE5 and RLR05C1002FSRE6 are suitable for manual assembly or processes compatible with cut tape packaging.

All parts comply with MIL-PRF-39017/05 military specifications and share identical RoHS non-compliance status and REACH compliance status. No electrical performance differences exist between these substitutes.

Frequently Asked Questions (FAQ)

Q: Can RLR05C1002FSRE5 or RLR05C1002FSRE6 be used as direct replacements for RLR05C1002FSRE7?

A: Yes. These parts are parametric equivalents with identical electrical and mechanical specifications. The only difference is packaging format (cut tape versus tape and reel). Direct substitution is valid provided the assembly process accommodates the packaging format.

Q: What is the difference between tape and reel (TR) and cut tape (CT) packaging?

A: Tape and reel packaging is designed for high-speed automated pick-and-place assembly equipment. Cut tape packaging is supplied in individual tape strips without the reel component, suitable for manual assembly or lower-volume automated processes.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts share identical RoHS status (non-compliant), REACH status (affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090).

Q: Which substitute part has the best inventory availability?

A: RLR05C1002FSRE6 has the highest inventory level at 2053 units in stock, followed by RLR05C1002FSRE5 with 1394 units.

Q: Do these parts meet military specifications?

A: Yes. All three parts conform to MIL-PRF-39017/05 military specifications and are classified as military-grade components with moisture resistance and weldability features.