RLR05C1001GSRE7 Equivalent & Substitute Parts

Part Overview

The RLR05C1001GSRE7 is a 1 kOhms ±2% metal film axial resistor rated at 0.125W (1/8W) manufactured by Vishay Dale. This component is part of the Military series (MIL-PRF-39017/05) and features moisture-resistant, weldable construction suitable for through-hole applications in military and high-reliability environments. The part is currently active in production with 1129 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility without circuit performance impact.

Substiute Parts

RLR05C1001GSRE7

Vishay DaleIn Stock: 1207RLR05C1001GSRE7 Datasheet

Current PartRFQ

RLR05C1001GSRE6

Vishay DaleIn Stock: 1137RLR05C1001GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR05C1001GSRE7 is determined by matching the following critical parameters: resistance value (1 kOhms), tolerance (±2%), power rating (0.125W), composition (metal film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 150°C), package type (axial), physical dimensions (0.066" Dia x 0.150" L), series classification (Military, MIL-PRF-39017/05, RLR05), and failure rate (S, 0.001%). The RLR05C1001GSRE6 qualifies as a parametric equivalent because it maintains all electrical and mechanical specifications identical to the main part. The only difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both packaging formats contain the same component with identical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both RLR05C1001GSRE7 and RLR05C1001GSRE6 are active production components from Vishay Dale with identical electrical performance and military-grade specifications. Selection between these parts depends on procurement and assembly requirements. The RLR05C1001GSRE7 in Tape & Reel format is suitable for automated pick-and-place assembly operations. The RLR05C1001GSRE6 in Cut Tape format accommodates manual assembly workflows or lower-volume production runs. Both parts maintain RoHS non-compliant status, REACH affected classification, and EAR99 export control designation. Component selection should align with assembly process capabilities and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can RLR05C1001GSRE6 be used as a direct replacement for RLR05C1001GSRE7 in circuit design?

A: Yes. Both parts are electrically and mechanically identical. They share the same resistance value (1 kOhms), tolerance (±2%), power rating (0.125W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 150°C). Circuit performance is unaffected by substitution.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape wound on a reel, optimized for automated assembly equipment. Cut Tape (CT) packaging supplies components on tape segments, suitable for manual assembly or lower-volume applications. The component itself is identical in both formats.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical compliance status: RoHS non-compliant, REACH affected, and EAR99 export classification. Military series designation (MIL-PRF-39017/05) and failure rate rating (S, 0.001%) are identical.

Q: Which part should be selected for automated assembly?

A: The RLR05C1001GSRE7 in Tape & Reel format is designed for automated pick-and-place assembly systems. The RLR05C1001GSRE6 in Cut Tape format is better suited for manual assembly or semi-automated processes.

Q: Is inventory availability a factor in part selection?

A: Both parts are in active production with comparable inventory levels (1129 units for RLR05C1001GSRE7 and 1117 units for RLR05C1001GSRE6). Selection should prioritize assembly process requirements over inventory considerations.