RLR05C1001GSRE5 Equivalent & Substitute Parts

Part Overview

The RLR05C1001GSRE5 is a 1 kOhms ±2% 0.125W axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/05 specifications. The part is currently active in production with 979 units in stock. Substitute parts are identified to address packaging format availability and inventory requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RLR05C1001GSRE5

Vishay DaleIn Stock: 1047RLR05C1001GSRE5 Datasheet

Current PartRFQ

RLR05C1001GSRE6

Vishay DaleIn Stock: 1137RLR05C1001GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR05C1001GSRE5 is determined by the following critical parameters:

• Resistance value: 1 kOhms
• Tolerance: ±2%
• Power rating: 0.125W (1/8W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Package type: Axial
• Physical dimensions: 0.066" Dia x 0.150" L (1.68mm x 3.81mm)
• Military series compliance: MIL-PRF-39017/05, RLR05

The identified substitute part RLR05C1001GSRE6 matches all electrical and mechanical parameters. The only difference is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both formats contain identical components with no functional or performance variation.

Parameter Comparison

Engineering Selection Recommendations

Both RLR05C1001GSRE5 and RLR05C1001GSRE6 are active production parts from Vishay Dale meeting MIL-PRF-39017/05 military specifications. Selection between these parts should be based on packaging requirements:

• RLR05C1001GSRE5 (Tape & Reel) is suitable for automated assembly processes requiring continuous tape feeding.
• RLR05C1001GSRE6 (Cut Tape) is suitable for manual assembly, small-batch production, or applications where individual component handling is preferred.

Both parts carry identical electrical performance, military-grade reliability ratings, and compliance status. The choice between them does not affect circuit performance or reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can RLR05C1001GSRE6 be used as a direct replacement for RLR05C1001GSRE5?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel versus Cut Tape). The component itself, its performance, and reliability are unchanged.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging supplies the same components cut from tape, suitable for manual assembly or lower-volume production runs. The resistor component is identical in both formats.

Q: Are there any performance differences between these substitute parts?

A: No. Both parts have identical resistance values, tolerance, power ratings, temperature coefficients, operating temperature ranges, and failure rates. Performance in circuit applications is equivalent.

Q: Which part should I select for my application?

A: Selection depends on your assembly process. Use RLR05C1001GSRE5 for automated assembly lines. Use RLR05C1001GSRE6 for manual assembly or when individual component handling is required. Both are suitable for military applications requiring MIL-PRF-39017/05 compliance.

Q: Are both parts currently available?

A: Yes. RLR05C1001GSRE5 has 979 units in stock, and RLR05C1001GSRE6 has 1117 units in stock.