RLR05C1000GSRE4 Equivalent & Substitute Parts

Part Overview

The RLR05C1000GSRE4 is a 100 Ohm, ±2% tolerance, 1/8W (0.125W) axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/05 specifications. The part is currently active in production with 1152 pieces available in stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical.

Substiute Parts

RLR05C1000GSRE4

Vishay DaleIn Stock: 1208RLR05C1000GSRE4 Datasheet

Current PartRFQ

RLR05C1000GSRE6

Vishay DaleIn Stock: 2053RLR05C1000GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR05C1000GSRE4 and RLR05C1000GSRE6 are parametric equivalents with identical electrical and mechanical specifications. Substitution is valid based on the following matching parameters:

• Resistance value: 100 Ohms
• Tolerance: ±2%
• Power rating: 0.125W (1/8W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Physical dimensions: 0.066" Dia x 0.150" L (1.68mm x 3.81mm)
• Series compliance: MIL-PRF-39017/05, RLR05
• Failure rate: S (0.001%)

The only difference between these parts is the packaging format: RLR05C1000GSRE4 is supplied in Tape & Reel (TR) format, while RLR05C1000GSRE6 is supplied in Cut Tape (CT) format. Both formats contain identical components suitable for automated or manual assembly processes.

Parameter Comparison

Engineering Selection Recommendations

Both RLR05C1000GSRE4 and RLR05C1000GSRE6 are active production parts with identical electrical performance and military-grade specifications. Selection between these parts depends on assembly process requirements:

RLR05C1000GSRE4 (Tape & Reel format) is suitable for high-volume automated assembly operations where tape-fed component placement equipment is utilized.

RLR05C1000GSRE6 (Cut Tape format) is suitable for lower-volume production, manual assembly, or applications where individual component handling is preferred.

Both parts maintain compliance with MIL-PRF-39017/05 military specifications and carry identical failure rate ratings. Inventory availability should be considered: RLR05C1000GSRE4 has 1152 pieces in stock, while RLR05C1000GSRE6 has 1964 pieces in stock.

Frequently Asked Questions (FAQ)

Q: Can RLR05C1000GSRE6 be used as a direct replacement for RLR05C1000GSRE4?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel versus Cut Tape). Direct substitution is valid for any application where the component specifications match the circuit requirements.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place equipment. Cut Tape (CT) packaging supplies components on tape segments, typically used for manual assembly or lower-volume production runs. Both formats contain the same component.

Q: Are there any performance differences between these substitute parts?

A: No. Both parts have identical resistance values, tolerance, power rating, temperature coefficient, operating temperature range, and failure rate specifications. Performance in circuit operation is equivalent.

Q: What compliance certifications apply to both parts?

A: Both parts comply with MIL-PRF-39017/05 military specifications. Both are RoHS non-compliant and REACH Affected. ECCN classification is EAR99 for both parts.

Q: Which part should I select for my application?

A: Selection depends on your assembly process. Use RLR05C1000GSRE4 for automated assembly with tape-fed equipment. Use RLR05C1000GSRE6 for manual assembly or lower-volume production. Verify packaging compatibility with your assembly equipment before final selection.