RL107-TP Equivalent & Substitute Parts

Part Overview

The RL107-TP is a general-purpose rectifier diode rated for 1000 V DC reverse voltage and 1 A average rectified current in an axial through-hole package. This component is classified as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing design support and procurement continuity. The RL107-TP serves applications requiring standard recovery rectification in power supply circuits, voltage regulation, and general signal protection.

Substiute Parts

RL107-TP

Micro Commercial CoIn Stock: 750RL107-TP Datasheet

Current PartRFQ

RL107GP-TP

Micro Commercial CoIn Stock: 1068RL107GP-TP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RL107-TP is determined by electrical and mechanical parameter equivalence. The primary substitution criteria are:

Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 1000 V
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 1 A
• Speed: Standard Recovery >500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: 5 µA @ 1000 V
• Capacitance @ Vr, F: 15pF @ 4V, 1MHz
• Operating Temperature - Junction: -55°C ~ 150°C

Mechanical Parameters:

• Mounting Type: Through Hole
• Package / Case: Axial
• Supplier Device Package: A-405

Compliance Parameters:

• RoHS Status: ROHS3 Compliant

The RL107GP-TP meets all electrical and mechanical requirements for direct substitution. The primary distinction is packaging format and product status.

Parameter Comparison

Engineering Selection Recommendations

The RL107GP-TP is the direct functional equivalent of the RL107-TP. Both components share identical electrical specifications, mechanical form factor, and compliance certifications. The RL107GP-TP is the preferred selection for new designs and ongoing procurement due to its active product status. The RL107-TP is classified as obsolete and should be replaced in active bill-of-materials documentation.

The RL107GP-TP is supplied in Tape & Reel (TR) packaging format, whereas the RL107-TP was supplied in bulk packaging. This packaging difference does not affect electrical performance or mechanical compatibility in through-hole applications. Component selection between these parts should be based on procurement volume requirements and assembly process specifications.

Both components maintain ROHS3 compliance and are suitable for applications requiring standard recovery rectification at 1000 V and 1 A ratings.

Frequently Asked Questions (FAQ)

Q: Can the RL107GP-TP directly replace the RL107-TP in existing designs?

A: Yes. The RL107GP-TP is electrically and mechanically equivalent to the RL107-TP. All electrical parameters, operating temperature range, and physical form factor are identical. The components are interchangeable in through-hole circuit applications.

Q: What is the difference between the RL107-TP and RL107GP-TP?

A: The primary differences are product status and packaging format. The RL107-TP is obsolete and supplied in bulk packaging. The RL107GP-TP is active and supplied in Tape & Reel (TR) format. Electrical specifications and mechanical dimensions are identical.

Q: Does the Tape & Reel packaging affect circuit performance?

A: No. Tape & Reel packaging is a supply format used for automated assembly processes. Once the component is removed from the tape and installed in the circuit, electrical and mechanical performance is identical to bulk-packaged components.

Q: Are both components RoHS compliant?

A: Yes. Both the RL107-TP and RL107GP-TP are ROHS3 compliant.

Q: What applications are these diodes suitable for?

A: These components are general-purpose rectifier diodes rated for 1000 V and 1 A. They are suitable for power supply circuits, voltage regulation, signal protection, and standard recovery rectification applications requiring these electrical ratings.

Q: Should I use the RL107-TP or RL107GP-TP for new designs?

A: Use the RL107GP-TP for new designs. The RL107-TP is obsolete and should not be specified in new bill-of-materials documentation. The RL107GP-TP maintains active product status and ensures long-term procurement availability.