RL07S223JR36 Equivalent & Substitute Parts

Part Overview

The RL07S223JR36 is a 22 kOhms ±5% 0.25W through-hole axial resistor manufactured by Vishay Dale, designed for military applications per MIL-PRF-22684/01 specification. This metal film resistor features flame retardant coating, moisture resistance, and safety-rated construction suitable for demanding environments. The part is currently active in production with 1101 pieces available in stock. Substitute parts are identified to address packaging format preferences, tolerance requirements, or inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

RL07S223JR36

Vishay DaleIn Stock: 1159RL07S223JR36 Datasheet

Current PartRFQ

RL07S223GB14

Vishay DaleIn Stock: 1215RL07S223GB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RL07S223JR36 is determined by the following critical parameters:

• Resistance Value: Must be 22 kOhms
• Power Rating: Must be 0.25W (1/4W)
• Package Type: Must be Axial
• Physical Dimensions: Must be 0.090" Dia x 0.240" L (2.29mm x 6.10mm)
• Composition: Must be Metal Film
• Temperature Coefficient: Must be ±200ppm/°C
• Operating Temperature Range: Must be -65°C to 175°C
• Series Compliance: Must meet MIL-PRF-22684/01 specification

The RL07S223GB14 qualifies as a direct substitute. While it features improved tolerance (±2% versus ±5%), this represents an upgrade in precision without compromising any electrical or mechanical compatibility. The difference in packaging format (Bulk versus Tape & Reel) does not affect functional substitution.

Parameter Comparison

Engineering Selection Recommendations

Both the RL07S223JR36 and RL07S223GB14 are active production parts manufactured by Vishay Dale under the same military specification series (MIL-PRF-22684/01). Selection between these parts should be based on:

RL07S223JR36 is appropriate when tape and reel packaging is required for automated assembly processes or when the standard ±5% tolerance specification is sufficient for circuit requirements.

RL07S223GB14 is appropriate when bulk packaging is acceptable and improved tolerance performance (±2%) provides circuit design margin or meets tighter tolerance specifications. Both parts maintain identical electrical performance across the full operating temperature range and comply with the same military standards and safety certifications.

Frequently Asked Questions (FAQ)

Q: Can RL07S223GB14 be used as a direct replacement for RL07S223JR36?

A: Yes. Both parts share identical resistance value, power rating, physical dimensions, temperature coefficient, and operating temperature range. The ±2% tolerance of the substitute represents improved precision compared to the ±5% tolerance of the original part.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment. Bulk packaging is suitable for manual assembly or alternative handling methods. The electrical and mechanical specifications of the resistor itself remain unchanged.

Q: Are both parts compliant with MIL-PRF-22684/01?

A: Yes. Both RL07S223JR36 and RL07S223GB14 are manufactured to the Military, MIL-PRF-22684/01, RL07 series specification and share identical military-grade features including flame retardant coating, moisture resistance, and safety construction.

Q: Does the improved tolerance of RL07S223GB14 affect circuit compatibility?

A: No. The ±2% tolerance of RL07S223GB14 is a tighter specification than the ±5% tolerance of RL07S223JR36. Any circuit designed to accept the original part will accept the substitute without modification.

Q: What is the physical footprint compatibility?

A: Both parts have identical axial package dimensions of 0.090" Dia x 0.240" L (2.29mm x 6.10mm) and are directly interchangeable on PCBs designed for axial through-hole resistors of this size.