RL07S103GRE6 Equivalent & Substitute Parts

Part Overview

The RL07S103GRE6 is a 10 kOhms ±2% 0.25W metal film through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-PRF-22684/01 specification. This axial component features flame retardant coating and moisture resistance, making it suitable for demanding environments requiring high reliability. The part is currently in active production status with 1467 units available in cut tape packaging. Substitute parts are identified when packaging format changes or inventory constraints require alternative sourcing while maintaining identical electrical and mechanical performance.

Substiute Parts

RL07S103GRE6

Vishay DaleIn Stock: 1510RL07S103GRE6 Datasheet

Current PartRFQ

RL07S103GB14

Vishay DaleIn Stock: 1496RL07S103GB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RL07S103GRE6 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part RL07S103GB14 maintains identical specifications in the following key areas:

• Resistance value: 10 kOhms
• Tolerance: ±2%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.090" Dia x 0.240" L (2.29mm x 6.10mm)
• Military series compliance: MIL-PRF-22684/01, RL07
• Feature set: Flame Retardant Coating, Military, Moisture Resistant, Safety

The only difference between the main part and substitute is the packaging format: RL07S103GRE6 is supplied in cut tape (CT), while RL07S103GB14 is supplied in bulk packaging. Both parts are manufactured by Vishay Dale and maintain active production status.

Parameter Comparison

Engineering Selection Recommendations

Both RL07S103GRE6 and RL07S103GB14 are active production components from Vishay Dale's military-grade RL07 series, fully compliant with MIL-PRF-22684/01 specifications. Selection between these parts should be based on packaging requirements and supply chain constraints:

• RL07S103GRE6 is appropriate for applications requiring cut tape packaging, which facilitates automated assembly processes and reduces component handling.
• RL07S103GB14 is appropriate for applications where bulk packaging is acceptable or preferred, offering alternative sourcing when cut tape availability is limited.

Both parts carry identical RoHS non-compliant status and ECCN EAR99 classification. Neither part introduces compliance or certification differences that would affect engineering selection.

Frequently Asked Questions (FAQ)

Q: Can RL07S103GB14 be used as a direct replacement for RL07S103GRE6 in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (cut tape versus bulk). Circuit performance, reliability, and environmental specifications are equivalent.

Q: What is the significance of the packaging difference between cut tape and bulk?

A: Cut tape packaging is pre-formatted for automated pick-and-place assembly equipment, while bulk packaging requires manual handling or custom tape preparation. The choice depends on manufacturing process requirements, not circuit functionality.

Q: Are both parts suitable for military applications?

A: Yes. Both RL07S103GRE6 and RL07S103GB14 are manufactured to MIL-PRF-22684/01 military specifications and feature flame retardant coating, moisture resistance, and safety characteristics required for military-grade applications.

Q: Do these parts have different temperature performance?

A: No. Both parts operate across the identical temperature range of -65°C to 175°C with the same temperature coefficient of ±200ppm/°C.

Q: Is there a difference in RoHS compliance between these parts?

A: No. Both parts carry identical RoHS non-compliant status, indicating they contain materials not restricted under RoHS directives.