RL07S102JR36 Equivalent & Substitute Parts

Part Overview

The RL07S102JR36 is a 1 kOhms ±5% 0.25W metal film axial through-hole resistor manufactured by Vishay Dale. This component is part of the military-grade RL07 series, compliant with MIL-PRF-22684/01 specifications. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The RL07S102JR36 is currently active in production with 858 pieces in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

RL07S102JR36

Vishay DaleIn Stock: 942RL07S102JR36 Datasheet

Current PartRFQ

RL07S102JB14

Vishay DaleIn Stock: 1570RL07S102JB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RL07S102JR36 is determined by strict equivalence across all electrical and mechanical parameters. The primary substitution criterion is packaging format. The RL07S102JR36 is supplied in Tape & Reel (TR) format, while the identified substitute RL07S102JB14 is supplied in Bulk packaging. Both parts maintain identical specifications across the following key parameters:

• Resistance value: 1 kOhms
• Tolerance: ±5%
• Power rating: 0.25W
• Composition: Metal Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.090" Dia x 0.240" L
• Military series compliance: MIL-PRF-22684/01, RL07
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The substitute part differs only in packaging delivery method, not in component performance or specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RL07S102JR36 and RL07S102JB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by procurement and assembly requirements rather than performance characteristics. The RL07S102JR36 in Tape & Reel format is suitable for automated assembly processes. The RL07S102JB14 in Bulk packaging is suitable for manual assembly or applications where tape-and-reel format is not required. Both parts maintain full compliance with MIL-PRF-22684/01 military specifications and carry identical RoHS non-compliant status. Current inventory availability shows 858 pieces for RL07S102JR36 and 1560 pieces for RL07S102JB14.

Frequently Asked Questions (FAQ)

Q: Can RL07S102JB14 be used as a direct replacement for RL07S102JR36?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: RL07S102JR36 is supplied in Tape & Reel format, while RL07S102JB14 is supplied in Bulk format. Component performance, specifications, and reliability are equivalent.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment. Bulk packaging is supplied as loose components suitable for manual assembly or applications where automated handling is not used. The resistor component itself is identical in both formats.

Q: Are both parts compliant with military specifications?

A: Yes. Both RL07S102JR36 and RL07S102JB14 comply with MIL-PRF-22684/01 military specifications and are part of the RL07 military-grade series.

Q: What is the operating temperature range for these resistors?

A: Both parts operate across -65°C to 175°C, suitable for military and high-reliability applications.

Q: Are these parts RoHS compliant?

A: No. Both RL07S102JR36 and RL07S102JB14 are RoHS non-compliant, consistent with military-grade component specifications.

Q: What is the moisture sensitivity level?

A: Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.