RL0607-6R8-R Equivalent & Substitute Parts

Part Overview

The RL0607-6R8-R is a 6.8 µH unshielded drum core wirewound inductor manufactured by Eaton - Electronics Division. This through-hole radial component is rated for 2.23 A continuous current with a maximum DC resistance of 38 mOhm and operates across the temperature range of -40°C to 125°C. The part is classified as obsolete, making identification of suitable substitute components essential for ongoing design support and procurement continuity.

Substiute Parts

RL0607-6R8-R

Eaton - Electronics DivisionIn Stock: 1079RL0607-6R8-R Datasheet

Current PartRFQ

RLB0914-6R8ML

Bourns Inc.In Stock: 1139RLB0914-6R8ML Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RL0607-6R8-R is determined by the following critical parameters:

Primary Matching Criteria:

• Inductance value: 6.8 µH with ±20% tolerance
• Core type: Ferrite drum core, unshielded
• Mounting configuration: Through-hole radial, vertical cylinder orientation
• DC resistance: Within acceptable operational limits (≤39 mOhm)

Secondary Compatibility Factors:

• Current rating: Substitute must support minimum 2.23 A continuous operation
• Operating temperature: Substitute must cover or exceed the -40°C to 125°C range
• Self-resonant frequency: Substitute must maintain frequency characteristics suitable for the application bandwidth

The RLB0914-6R8ML meets all primary matching criteria and exceeds secondary compatibility requirements, qualifying it as a direct substitute for the obsolete RL0607-6R8-R.

Parameter Comparison

Engineering Selection Recommendations

The RLB0914-6R8ML from Bourns Inc. is the qualified substitute for the obsolete RL0607-6R8-R. Selection is based on the following engineering factors:

Electrical Equivalence: Both components share identical inductance values (6.8 µH) and tolerance specifications (±20%). DC resistance values are equivalent at 38 mOhm and 39 mOhm respectively, ensuring comparable power dissipation characteristics.

Current Capacity: The RLB0914-6R8ML provides 3 A current rating, exceeding the original 2.23 A requirement. This margin provides operational headroom without introducing design complications.

Physical Compatibility: Both inductors utilize identical through-hole radial mounting configurations with vertical cylinder package geometry, permitting direct PCB footprint compatibility.

Compliance Status: The RLB0914-6R8ML carries active product status with ROHS3 compliance and REACH unaffected designation, ensuring long-term supply chain availability and regulatory alignment.

Temperature Consideration: The substitute operates to 105°C maximum, compared to the original 125°C upper limit. Applications requiring sustained operation above 105°C require thermal analysis or alternative component selection.

Frequently Asked Questions (FAQ)

Q: Can the RLB0914-6R8ML be used as a direct replacement for the RL0607-6R8-R?

A: Yes. Both components share identical inductance values, tolerance specifications, core materials, and mounting configurations. The substitute meets or exceeds all primary electrical parameters.

Q: What is the impact of the higher current rating on the RLB0914-6R8ML?

A: The 3 A rating of the substitute exceeds the original 2.23 A requirement. This provides operational margin and does not introduce compatibility issues. The component will function correctly in circuits designed for the lower current specification.

Q: Does the operating temperature difference affect substitution suitability?

A: The RLB0914-6R8ML operates to 105°C maximum, versus 125°C for the original part. For applications operating continuously above 105°C, thermal analysis is required to confirm suitability. For standard operating ranges below 105°C, no thermal impact occurs.

Q: Are there physical size differences between these components?

A: Yes. The RLB0914-6R8ML has larger dimensions (0.343" diameter, 0.512" height) compared to the RL0607-6R8-R (0.224" diameter, 0.287" height). PCB layout verification is required to confirm clearance compatibility, though both use identical radial through-hole mounting.

Q: What is the supply status difference between these parts?

A: The RL0607-6R8-R is obsolete with no ongoing production. The RLB0914-6R8ML is in active production status, ensuring long-term availability and supply chain continuity.

Q: Are there compliance or certification differences?

A: The RLB0914-6R8ML carries ROHS3 compliance and REACH unaffected status. Both components share the same ECCN (EAR99) and HTSUS classification, ensuring regulatory alignment for procurement and export purposes.