Equivalent & Substitute Parts for RK73H1HTTC2004F

Part Overview

The RK73H1HTTC2004F is a 2 MOhms ±1% thick film chip resistor in 0201 package format, rated for 0.05W (1/20W) power dissipation. Manufactured by KOA Speer Electronics, Inc., this component meets AEC-Q200 automotive qualification standards and incorporates moisture-resistant construction suitable for automotive and industrial applications operating across -55°C to 155°C.

The RK73H1HTTC2004F carries a "Not For New Designs" product status designation. Identifying equivalent substitute parts ensures design continuity and supply chain flexibility for existing applications and legacy system support.

Substiute Parts

RK73H1HTTC2004F

KOA Speer Electronics, Inc.In Stock: 54138RK73H1HTTC2004F Datasheet

Current PartRFQ

RK73H1HTTCM2004F

KOA Speer Electronics, Inc.In Stock: 750RK73H1HTTCM2004F Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RK73H1HTTC2004F is determined by strict equivalence across the following critical parameters:

Electrical Parameters: Resistance value (2 MOhms), tolerance (±1%), power rating (0.05W), and temperature coefficient (±200ppm/°C) must match exactly.

Package Parameters: Physical package designation (0201 / 0603 Metric), footprint dimensions (0.024" L x 0.012" W), and termination count (2) must be identical.

Environmental & Compliance Parameters: Operating temperature range (-55°C to 155°C), AEC-Q200 automotive qualification, moisture sensitivity level (MSL 1), RoHS3 compliance, and REACH status must align.

Composition: Thick film construction is required for functional equivalence.

Substitute parts must satisfy all parameters simultaneously. Partial parameter matching does not establish substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

The RK73H1HTTCM2004F qualifies as a direct electrical and mechanical substitute for the RK73H1HTTC2004F. Both components are manufactured by KOA Speer Electronics, Inc., within the RK73H series, and share identical electrical specifications, package geometry, and environmental ratings.

The primary distinction is product lifecycle status: RK73H1HTTC2004F is designated "Not For New Designs," while RK73H1HTTCM2004F maintains "Active" status. For applications requiring component replacement or supply continuity, RK73H1HTTCM2004F provides equivalent functional performance with ongoing manufacturer support and availability.

Both parts satisfy AEC-Q200 automotive qualification requirements, ROHS3 compliance, and REACH regulatory status, making them suitable for automotive and industrial applications within the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can RK73H1HTTCM2004F be used as a direct replacement for RK73H1HTTC2004F in existing designs?

A: Yes. Both components are electrically and mechanically identical across all specified parameters: 2 MOhms resistance, ±1% tolerance, 0.05W power rating, 0201 package, ±200ppm/°C temperature coefficient, and -55°C to 155°C operating range. PCB layout and circuit design require no modification.

Q: What is the significance of the "Not For New Designs" status on RK73H1HTTC2004F?

A: This designation indicates the component is in end-of-life phase. Existing applications may continue using available inventory, but new design implementations should transition to RK73H1HTTCM2004F, which maintains active production status and manufacturer support.

Q: Are there any differences in moisture handling or storage between these two parts?

A: No. Both components carry MSL 1 (Unlimited) moisture sensitivity level, indicating no special moisture control requirements during storage, handling, or assembly.

Q: Do both parts meet automotive qualification standards?

A: Yes. Both RK73H1HTTC2004F and RK73H1HTTCM2004F are AEC-Q200 qualified, meeting automotive industry reliability and performance standards.

Q: Are there packaging differences between the main part and substitute?

A: No. Both components use identical 0201 (0603 Metric) package format with matching footprint dimensions (0.024" L x 0.012" W) and maximum seated height (0.010").