RK73G1HTTC2403D Equivalent & Substitute Parts

Part Overview

The RK73G1HTTC2403D is a 240 kOhms ±0.5% thick film chip resistor in 0201 package (0603 Metric) rated for 0.05W (1/20W) power dissipation. This component is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently classified as "Not For New Designs," which necessitates identification of equivalent substitute components that maintain identical electrical and mechanical specifications while offering active product status and continued availability.

Substiute Parts

RK73G1HTTC2403D

KOA Speer Electronics, Inc.In Stock: 973RK73G1HTTC2403D Datasheet

Current PartRFQ

RK73G1HTTCM2403D

KOA Speer Electronics, Inc.In Stock: 1203RK73G1HTTCM2403D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RK73G1HTTC2403D is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 240 kOhms (exact match required)
• Tolerance: ±0.5% (exact match required)
• Power rating: 0.05W / 1/20W (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)

Mechanical Parameters:

• Package / Case: 0201 (0603 Metric) (exact match required)
• Physical dimensions: 0.024" L x 0.012" W / 0.60mm x 0.30mm (exact match required)
• Height - Seated (Max): 0.010" (0.26mm) (exact match required)

Compliance & Certification:

• Automotive AEC-Q200 qualification (exact match required)
• RoHS3 compliance (exact match required)
• Moisture Sensitivity Level 1 (exact match required)

Composition:

• Thick Film construction (exact match required)

Substitute parts must satisfy all parameters listed above without deviation. The RK73G1HTTCM2403D meets all substitution criteria and is classified as an active product with manufacturer recommendation.

Parameter Comparison

Engineering Selection Recommendations

The RK73G1HTTCM2403D is the manufacturer-recommended substitute for the RK73G1HTTC2403D. Both components are manufactured by KOA Speer Electronics, Inc., and belong to the RK73G series. The substitute part maintains complete electrical and mechanical equivalence across all specified parameters.

Selection Basis:

The RK73G1HTTCM2403D is classified as an Active product, whereas the RK73G1HTTC2403D is designated "Not For New Designs." This status difference reflects the manufacturer's product lifecycle management and indicates that the substitute part represents the current production equivalent with ongoing availability and support.

Both parts satisfy identical compliance requirements:

• AEC-Q200 automotive qualification
• ROHS3 compliance
• REACH Unaffected status
• Moisture Sensitivity Level 1

The substitute part is suitable for direct replacement in all applications where the main part was originally specified, with no circuit redesign or board layout modifications required.

Frequently Asked Questions (FAQ)

Q: Can RK73G1HTTCM2403D be used as a direct replacement for RK73G1HTTC2403D?

A: Yes. The RK73G1HTTCM2403D is electrically and mechanically identical to the RK73G1HTTC2403D. All electrical parameters (resistance, tolerance, power rating, temperature coefficient, operating temperature range) and mechanical specifications (package, dimensions, height) are equivalent. No circuit modifications are required.

Q: What is the difference between these two part numbers?

A: The primary difference is product status. The RK73G1HTTC2403D is classified as "Not For New Designs," while the RK73G1HTTCM2403D is an Active product. The suffix variation in the part number reflects the manufacturer's product lifecycle designation. All functional and compliance specifications remain identical.

Q: Are both parts AEC-Q200 qualified?

A: Yes. Both the RK73G1HTTC2403D and RK73G1HTTCM2403D carry AEC-Q200 automotive qualification and are suitable for automotive applications requiring this certification.

Q: Do these parts have identical physical dimensions?

A: Yes. Both parts are packaged in 0201 (0603 Metric) with dimensions of 0.024" L x 0.012" W (0.60mm x 0.30mm) and maximum seated height of 0.010" (0.26mm). They are footprint-compatible and require no PCB layout changes.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the RK73G1HTTC2403D and RK73G1HTTCM2403D are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control measures are required during storage, handling, or assembly.

Q: Can I use these parts interchangeably in existing designs?

A: Yes. The RK73G1HTTCM2403D can be substituted for the RK73G1HTTC2403D in any existing design without requiring circuit analysis, simulation, or board layout modifications. All electrical and mechanical parameters are equivalent.