Equivalent & Substitute Parts for RK73B1HTTC514J

Part Overview

The RK73B1HTTC514J is a 510 kOhms ±5% thick film chip resistor manufactured by KOA Speer Electronics, Inc., rated at 0.05W (1/20W) in 0201 package format (0.60mm x 0.30mm). This component meets AEC-Q200 automotive qualification standards and operates across -55°C to 155°C. The part is classified as "Not For New Designs," indicating it has been superseded in the manufacturer's product line. Identification of equivalent and substitute parts is necessary for design continuity, inventory management, and sourcing flexibility when the primary part becomes unavailable or when design requirements necessitate alternative specifications.

Key Parameters

Parameter	Value	Significance for Substitution
Resistance Value	510 kOhms	Must match exactly for direct substitution
Tolerance	±5%	Defines acceptable resistance range; tighter tolerances are upgrades
Power Rating	0.05W (1/20W)	Must match or exceed for thermal compatibility
Package / Case	0201 (0603 Metric)	Physical footprint; must match for PCB compatibility
Composition	Thick Film	Determines electrical characteristics and temperature behavior
Temperature Coefficient	±200ppm/°C	Affects resistance stability across operating range
Operating Temperature Range	-55°C ~ 155°C	Must support application thermal requirements
Moisture Sensitivity Level (MSL)	1 (Unlimited)	Indicates handling and storage requirements
RoHS Compliance	ROHS3 Compliant	Environmental and regulatory requirement

Substitute Part Grouping Explanation

Substitution logic for the RK73B1HTTC514J is based on strict electrical and mechanical parameter matching:

Direct Equivalents (Same Specifications): Parts that maintain identical resistance value (510 kOhms), tolerance (±5%), power rating (0.05W), package (0201), composition (thick film), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C ~ 155°C) are classified as direct substitutes. These parts are interchangeable without circuit redesign.

Key Matching Parameters:

Resistance: 510 kOhms (exact match required)
Tolerance: ±5% (exact match for direct substitution)
Power: 0.05W minimum (equal or greater acceptable)
Package: 0201 (0603 Metric) (exact match required)
Temperature Range: -55°C minimum to 155°C maximum (must encompass or equal)
Composition: Thick Film (exact match required)

Upgrade Parts (Enhanced Specifications): Parts with tighter tolerance (±1% instead of ±5%) or improved temperature coefficient (±100ppm/°C instead of ±200ppm/°C) are classified as upgrades. These provide superior performance characteristics while maintaining all other critical parameters. Upgrades are suitable for applications requiring higher precision.

Compatibility Constraints: All substitute parts must maintain ROHS3 compliance, MSL Level 1 rating, and 0201 package format. Operating temperature range must support the full -55°C to 155°C specification or the application's actual thermal requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Product Status	Inventory (Pcs)
RK73B1HTTC514J	KOA Speer Electronics	510 kΩ	±5%	0.05	±200	-55 ~ 155	Not For New Designs	9,682
RK73B1HTTCM514J	KOA Speer Electronics	510 kΩ	±5%	0.05	±200	-55 ~ 155	Active	1,083
AC0201JR-07510KL	YAGEO	510 kΩ	±5%	0.05	±200	-55 ~ 155	Active	1,080
CRCW0201510KJNED	Vishay Dale	510 kΩ	±5%	0.05	±200	-55 ~ 155	Active	895
ERJ-1GNJ514C	Panasonic Electronic Components	510 kΩ	±5%	0.05	±200	-55 ~ 125	Active	53,986
RC0201JR-07510KL	YAGEO	510 kΩ	±5%	0.05	±200	-55 ~ 125	Active	15,664
CRCW0201510KFKED	Vishay Dale	510 kΩ	±1%	0.05	±100	-55 ~ 155	Active	10,006
CRCW0201510KFNED	Vishay Dale	510 kΩ	±1%	0.05	±200	-55 ~ 155	Active	19,674
ERJ-1GNF5103C	Panasonic Electronic Components	510 kΩ	±1%	0.05	±200	-55 ~ 125	Active	44,989

Engineering Selection Recommendations

For Direct Replacement (Same Specifications):

When the RK73B1HTTC514J must be replaced with an equivalent part maintaining ±5% tolerance and -55°C to 155°C operating range, the following active parts are suitable:

RK73B1HTTCM514J (KOA Speer Electronics): Manufacturer-recommended successor from the same series. Maintains all electrical and thermal specifications. Recommended for design continuity within the KOA product family.
AC0201JR-07510KL (YAGEO): Active status with full -55°C to 155°C range. Includes moisture-resistant feature. Suitable for applications requiring extended temperature operation.
CRCW0201510KJNED (Vishay Dale): Active status with full -55°C to 155°C range. Established supply chain availability.

For Applications Limited to -55°C to 125°C:

When the application does not require the full 155°C upper temperature limit, the following parts provide equivalent performance with higher inventory availability:

ERJ-1GNJ514C (Panasonic Electronic Components): Highest inventory level (53,986 pcs). Suitable for applications with -55°C to 125°C thermal envelope.
RC0201JR-07510KL (YAGEO): Active status with moisture-resistant composition. Inventory of 15,664 pcs provides supply security.

For Precision Applications (Upgrade to ±1% Tolerance):

When circuit design permits or requires tighter tolerance specifications:

CRCW0201510KFNED (Vishay Dale): ±1% tolerance with ±200ppm/°C temperature coefficient. Maintains full -55°C to 155°C range. Inventory of 19,674 pcs.
CRCW0201510KFKED (Vishay Dale): ±1% tolerance with improved ±100ppm/°C temperature coefficient. Full -55°C to 155°C range. Inventory of 10,006 pcs.
ERJ-1GNF5103C (Panasonic Electronic Components): ±1% tolerance with ±200ppm/°C temperature coefficient. Highest inventory among precision options (44,989 pcs). Limited to -55°C to 125°C.

Compliance and Regulatory Considerations:

All listed substitute parts maintain ROHS3 compliance and MSL Level 1 rating, meeting automotive and industrial application requirements. All parts are packaged in 0201 (0603 Metric) format with identical physical dimensions (0.024" L x 0.012" W, 0.60mm x 0.30mm).

Frequently Asked Questions (FAQ)

Q: Can ERJ-1GNJ514C replace RK73B1HTTC514J in all applications?

A: ERJ-1GNJ514C is a direct electrical equivalent with matching 510 kOhms ±5% specifications and 0.05W power rating. However, its operating temperature range is -55°C to 125°C, compared to the original part's -55°C to 155°C. Substitution is valid only for applications where the maximum operating temperature does not exceed 125°C.

Q: What is the difference between direct substitutes and upgrade parts?

A: Direct substitutes maintain identical electrical specifications (510 kOhms ±5%, ±200ppm/°C temperature coefficient). Upgrade parts offer tighter tolerance (±1%) or improved temperature coefficient (±100ppm/°C), providing superior precision and stability. Upgrades are backward-compatible but may increase component cost.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All listed substitute parts are packaged in 0201 (0603 Metric) format with identical physical dimensions (0.024" L x 0.012" W, 0.60mm x 0.30mm). PCB footprints are interchangeable without modification.

Q: Which substitute part has the highest inventory availability?

A: ERJ-1GNJ514C (Panasonic Electronic Components) has the highest inventory at 53,986 pcs. For applications supporting the -55°C to 125°C temperature range, this part offers supply security. For full -55°C to 155°C range, CRCW0201510KFNED (Vishay Dale) provides 19,674 pcs.

Q: Is RK73B1HTTCM514J the recommended replacement for RK73B1HTTC514J?

A: RK73B1HTTCM514J is the manufacturer-recommended active successor from KOA Speer Electronics. It maintains identical specifications and is the preferred choice for design continuity within the KOA product family. However, it has lower inventory (1,083 pcs) compared to other alternatives.

Q: Can I use a ±1% tolerance part in place of a ±5% tolerance part?

A: Yes. A ±1% tolerance part is a functional upgrade and is backward-compatible with designs specified for ±5% tolerance. The tighter tolerance provides superior precision and may improve circuit performance in applications sensitive to resistance variation. No circuit redesign is required.

Q: What does MSL Level 1 mean for component handling?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without special moisture control measures. These components do not require dry-pack storage or baking before soldering, simplifying inventory management and reducing handling costs.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance, meeting environmental and regulatory requirements for automotive and industrial applications. No hazardous substances are present in quantities exceeding regulatory thresholds.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message