RJSNE5F8F08 Equivalent & Substitute Parts

Part Overview

The RJSNE5F8F08 is a shielded modular jack connector manufactured by Amphenol ICC (Commercial Products). This 8p8c (RJ45/Ethernet) connector features a 90° right-angle orientation with through-hole solder termination and integrated LED indicators. The part is classified as obsolete, necessitating identification of active equivalent models to maintain design continuity and ensure ongoing component availability for production and field replacement applications.

Substiute Parts

RJSNE5F8F08

Amphenol ICC (Commercial Products)In Stock: 1168RJSNE5F8F08 Datasheet

Current PartRFQ

RJSAE5F8F08

Amphenol ICC (Commercial Products)In Stock: 829RJSAE5F8F08 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RJSNE5F8F08 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Jack
• Contact Configuration: 8p8c (RJ45, Ethernet)
• Number of Ports: 8
• Number of Rows: 2
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Termination Method: Solder
• Shielding: Shielded
• Contact Material: Phosphor Bronze
• Contact Finish: Gold with 50.0µin (1.27µm) thickness
• Housing Material: Thermoplastic
• LED Indicators: Green, Yellow
• Tab Direction: Up and Down
• RoHS Compliance: Compliant

The RJSAE5F8F08 meets all mandatory matching parameters and qualifies as a direct substitute. Both parts are manufactured by Amphenol ICC (Commercial Products) within the modular connector category and share identical mechanical and electrical interface specifications.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE5F8F08 is the direct equivalent substitute for the obsolete RJSNE5F8F08. Selection between these parts should be based on the following criteria:

Use RJSAE5F8F08 when:

• Active production status is required
• Operating temperature range of -40°C to 70°C is acceptable for the application
• Current component availability and long-term supply continuity are priorities
• RoHS compliance certification is required

Use RJSNE5F8F08 when:

• Existing inventory must be depleted
• Operating temperature range of -40°C to 85°C is a design requirement
• Legacy system compatibility with original part specifications is mandated

Both parts carry RoHS compliance certification and are manufactured by Amphenol ICC (Commercial Products). The RJSAE5F8F08 is recommended for new designs and ongoing production due to its active product status.

Frequently Asked Questions (FAQ)

Q: Can RJSAE5F8F08 be used as a direct replacement for RJSNE5F8F08 in existing designs?

A: Yes. Both parts share identical mechanical and electrical interface specifications, including connector type, contact configuration, mounting orientation, termination method, shielding, contact materials, and finish specifications. The parts are pin-compatible and footprint-compatible for through-hole PCB applications.

Q: What is the difference in operating temperature range between these parts?

A: The RJSNE5F8F08 operates from -40°C to 85°C, while the RJSAE5F8F08 operates from -40°C to 70°C. If your application requires operation above 70°C, the RJSNE5F8F08 specifications must be maintained. For applications within the -40°C to 70°C range, both parts are equivalent.

Q: Why is RJSNE5F8F08 classified as obsolete?

A: Product obsolescence is determined by manufacturer discontinuation. The RJSAE5F8F08 represents the active production equivalent, ensuring continued availability and supply chain stability.

Q: Are both parts RoHS compliant?

A: Yes. Both RJSNE5F8F08 and RJSAE5F8F08 are RoHS compliant, meeting environmental and regulatory requirements for electronic component manufacturing.

Q: What is the moisture sensitivity level (MSL) for these connectors?

A: The RJSNE5F8F08 has MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. The RJSAE5F8F08 is listed as Not Applicable for MSL, indicating standard handling procedures are sufficient.

Q: Can these connectors be used interchangeably in the same PCB assembly?

A: Yes. Both connectors have identical through-hole mounting specifications, solder termination requirements, and mechanical dimensions. They can be used interchangeably without PCB redesign or assembly process modification.