RJSNE5F8708

Part Overview

The RJSNE5F8708 is a Jack Modular Connector (8p8c/RJ45 Ethernet) manufactured by Amphenol ICC (Commercial Products), configured for 90° right-angle mounting with Through Hole termination and shielding. The product is currently obsolete, necessitating identification of compatible substitute components to maintain design continuity and system functionality. The primary substitute is sourced from the same manufacturer's active product line.

Substiute Parts

RJSNE5F8708

Amphenol ICC (Commercial Products)In Stock: 744RJSNE5F8708 Datasheet

Current PartRFQ

RJSAE5F8708

Amphenol ICC (Commercial Products)In Stock: 949RJSAE5F8708 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RJSNE5F8708 is determined by strict equivalence of the following electrical and mechanical parameters:

• Connector Type: Jack (modular, 8p8c configuration)
• Contact Configuration: 8p8c (RJ45, Ethernet standard)
• Orientation: 90° right-angle mounting
• Mounting Method: Through Hole solder termination
• Shielding: Shielded construction
• Contact Material and Finish: Phosphor Bronze with Gold plating (50.0µin minimum)
• Housing: Thermoplastic material
• Environmental Compliance: RoHS Compliant

The RJSAE5F8708 qualifies as a direct substitute based on full alignment with these critical parameters. Both connectors share identical contact configurations, mounting orientation, termination method, and shielding characteristics, ensuring functional and form-factor compatibility.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE5F8708 is approved for direct substitution with the obsolete RJSNE5F8708. Both components meet RoHS compliance requirements and are manufactured by Amphenol ICC (Commercial Products). The substitute is currently active in the manufacturer's product line, ensuring availability and long-term supply continuity.

The substitute operates within a reduced upper temperature limit (-40°C to 70°C versus -40°C to 85°C for the original part). Applications requiring sustained operation above 70°C require evaluation against actual thermal conditions during system operation.

The RJSAE5F8708 is available in significantly higher inventory levels (906 units) compared to residual stock of the obsolete part, supporting immediate procurement and production requirements.

Frequently Asked Questions (FAQ)

Q: Can the RJSAE5F8708 directly replace the RJSNE5F8708 in existing designs? A: Yes. Both connectors share identical electrical contact configurations (8p8c RJ45), mechanical orientation (90° right-angle), mounting method (Through Hole solder), and shielding characteristics. Physical form factors and pin assignments are equivalent.

Q: Are there differences in operating temperature specifications? A: The RJSAE5F8708 operates from -40°C to 70°C, compared to the original part's -40°C to 85°C range. For applications operating continuously above 70°C, thermal performance must be confirmed against system requirements.

Q: How do LED indicators compare between the two parts? A: Both connectors feature dual Red-Green LED indicators with identical tab orientation (Up and Down). LED functionality and electrical interface are equivalent.

Q: What are the RoHS compliance implications? A: Both parts are RoHS Compliant, meeting environmental and regulatory standards for electronics manufacturing and procurement.

Q: Are there supply chain considerations? A: The RJSNE5F8708 is obsolete. The RJSAE5F8708 is active and available in production quantities, eliminating supply discontinuity and supporting long-term product support cycles.