RJSNE5F8208 Equivalent & Substitute Parts

Part Overview

The RJSNE5F8208 is a Jack Modular Connector (RJ45/Ethernet) featuring 8 positions and 8 contacts (8p8c), 90° right-angle orientation, shielded design with board lock feature, and through-hole solder termination. The product is currently classified as obsolete, necessitating identification of functionally equivalent alternatives for continued component sourcing and system integration.

Substiute Parts

RJSNE5F8208

Amphenol ICC (Commercial Products)In Stock: 847RJSNE5F8208 Datasheet

Current PartRFQ

RJSAE5F8208

Amphenol ICC (Commercial Products)In Stock: 1024RJSAE5F8208 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RJSNE5F8208 is determined by the following critical parameters that must remain consistent:

Electrical and Mechanical Compatibility Requirements:

• Connector Type: Jack (8p8c RJ45/Ethernet standard)
• Contact Count and Configuration: 8 positions and 8 contacts (2 rows)
• Mounting Interface: Through-hole solder termination
• Orientation: 90° right-angle configuration
• Shielding: Shielded design for electromagnetic interference mitigation
• Contact Material and Finish: Phosphor bronze with gold plating (50.0µin minimum)
• Housing Material: Thermoplastic construction

The RJSAE5F8208 satisfies all critical substitution criteria, maintaining identical connector topology, termination method, mechanical orientation, and contact specifications. Both components are from Amphenol ICC and utilize the same RJ45/Ethernet standard pinout configuration.

Parameter Comparison

Engineering Selection Recommendations

RJSAE5F8208 Primary Substitute: The RJSAE5F8208 is the direct equivalent for RJSNE5F8208 applications. Both components are RoHS compliant and manufactured by Amphenol ICC with identical mechanical and electrical specifications. The RJSAE5F8208 maintains active product status and current availability, making it the preferred selection for new designs and component replenishment.

Thermal Consideration: The RJSAE5F8208 specifies an upper operating temperature of 70°C compared to the RJSNE5F8208 specification of 85°C. Design environments requiring sustained operation above 70°C require evaluation against the lower thermal specification of the substitute component.

Frequently Asked Questions (FAQ)

Q: Can RJSAE5F8208 directly replace RJSNE5F8208 in existing assemblies? A: Yes. The RJSAE5F8208 is mechanically and electrically compatible with the RJSNE5F8208. Both connectors share identical through-hole pinout, solder termination, shielded configuration, and RJ45/Ethernet contact specifications.

Q: What is the difference between these two connectors? A: The primary difference is operating temperature range: RJSNE5F8208 (-40°C to 85°C) versus RJSAE5F8208 (-40°C to 70°C). All other parameters—connector type, contact configuration, orientation, shielding, material composition, and RoHS compliance—are identical.

Q: Is thermal performance a concern when substituting RJSAE5F8208 for RJSNE5F8208? A: Substitution is valid for applications where the maximum sustained operating temperature remains below 70°C. Designs routinely operating above 70°C require thermal validation against the substitute component specification.

Q: Are both connectors RoHS compliant? A: Yes. Both RJSNE5F8208 and RJSAE5F8208 are RoHS compliant and suitable for applications requiring environmental regulatory compliance.

Q: What MSL (Moisture Sensitivity Level) applies to the substitute part? A: The RJSAE5F8208 has MSL not applicable, while the RJSNE5F8208 specifies MSL 1 (unlimited). Both are suitable for standard PCB assembly and storage conditions.