RJSNE5F8008 Modular Connector - Equivalent & Substitute Parts

Part Overview

The RJSNE5F8008 is a shielded Jack Modular Connector in 8p8c configuration (RJ45/Ethernet) with 90° right-angle orientation, manufactured by Amphenol ICC (Commercial Products). This connector is designated as obsolete, necessitating identification of functionally equivalent active alternatives for new designs and ongoing production requirements. The RJSAE5F8008 provides direct electrical and mechanical compatibility while maintaining active product status.

Substiute Parts

RJSNE5F8008

Amphenol ICC (Commercial Products)In Stock: 1162RJSNE5F8008 Datasheet

Current PartRFQ

RJSAE5F8008

Amphenol ICC (Commercial Products)In Stock: 717RJSAE5F8008 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between RJSNE5F8008 and RJSAE5F8008 is valid based on the following electrical and mechanical equivalence:

Matching Parameters:

• Connector configuration: 8p8c (RJ45, Ethernet)
• Orientation: 90° right-angle
• Mounting type: Through hole solder termination
• Shielding: Shielded design
• Contact system: Phosphor bronze with gold plating (50.0µin thickness)
• Housing material: Thermoplastic
• Number of ports: 8
• Number of rows: 2
• RoHS compliance: Both parts are RoHS compliant

The primary distinction is the product status transition from obsolete to active, with a minor operating temperature range variance.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE5F8008 is the direct equivalent for the obsolete RJSNE5F8008. Selection of RJSAE5F8008 is supported by:

• Active product status: RJSAE5F8008 maintains active status with guaranteed supply continuity and manufacturer support
• RoHS compliance: Both parts are RoHS compliant, confirming regulatory alignment across substitution
• Electrical and mechanical equivalence: All termination, contact, and housing specifications are identical

Applications operating within the RJSAE5F8008 temperature range (-40°C to 70°C) can directly replace RJSNE5F8008 connectors without design modification. Applications requiring the extended upper temperature range of RJSNE5F8008 (85°C) require thermal performance evaluation against the RJSAE5F8008 specification.

Frequently Asked Questions (FAQ)

Q: Are RJSNE5F8008 and RJSAE5F8008 electrically identical? A: Yes. Both connectors use identical contact material (phosphor bronze), finish specifications (gold, 50.0µin), and configuration (8p8c RJ45, shielded). Electrical performance is equivalent.

Q: Can RJSAE5F8008 be used in applications designed for RJSNE5F8008? A: Direct substitution is valid for applications operating within -40°C to 70°C. Applications requiring operation at temperatures above 70°C and up to 85°C must be re-evaluated against RJSAE5F8008 thermal specifications.

Q: What is the difference between the two part numbers? A: The primary difference is product status. RJSNE5F8008 is obsolete with limited availability, while RJSAE5F8008 is active with full supply support. Both maintain identical mechanical and electrical specifications for 8p8c shielded RJ45 jack connectors with through-hole solder termination.

Q: Are both parts RoHS compliant? A: Yes. Both RJSNE5F8008 and RJSAE5F8008 are RoHS compliant, confirming regulatory suitability for contemporary design standards.

Q: Can these connectors be used interchangeably in existing assemblies? A: Yes. The connectors are mechanically and electrically interchangeable. PCB footprints designed for RJSNE5F8008 accommodate RJSAE5F8008 without modification, provided operating temperatures remain within -40°C to 70°C.