RJSNE538E08 Equivalent & Substitute Parts

Part Overview

The RJSNE538E08 is a modular jack connector (RJ45, Ethernet) manufactured by Amphenol ICC with 8 positions and 8 contacts, featuring a 90° right-angle orientation and shielding with EMI finger. This connector is currently classified as obsolete, necessitating the identification of suitable substitute components for ongoing system integration and board-level applications where this connector type is required.

Substiute Parts

RJSNE538E08

Amphenol ICC (Commercial Products)In Stock: 765RJSNE538E08 Datasheet

Current PartRFQ

RJSAE538E08

Amphenol ICC (Commercial Products)In Stock: 1032RJSAE538E08 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute compatibility for the RJSNE538E08 is determined by the following critical parameters:

• Connector Type: Jack configuration only
• Contact Configuration: 8p8c (RJ45, Ethernet) standard
• Orientation: 90° right-angle mounting
• Termination Method: Solder attachment to PCB
• Shielding Design: Shielded construction with EMI finger
• Mounting: Through-hole technology
• Contact System: Phosphor bronze with gold plating at 50.0µin thickness
• Operating Temperature: -40°C to 85°C range
• Regulatory Compliance: RoHS compliance required

The RJSAE538E08 qualifies as a direct substitute based on identical electrical contact configuration, mechanical form factor, and thermal/environmental specifications. Both components maintain the same 8p8c Ethernet jack standard with matching 90° right-angle orientation, solder termination, and shielded EMI design. Functional equivalency is established through matching contact material composition, finish specifications, and operating temperature ratings.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE538E08 is qualified as the primary substitute for the obsolete RJSNE538E08. Selection rationale is based on:

1. Product Status: The RJSAE538E08 maintains active product status with established supply availability (966 Pcs in stock), whereas the RJSNE538E08 is classified as obsolete.

2. Regulatory Compliance: Both components are RoHS compliant, ensuring continued compliance with environmental and materials restrictions applicable to electronics manufacturing.

3. Functional Equivalency: Parameter matching across all critical electrical, mechanical, and thermal specifications ensures direct functional replacement without board-level redesign.

4. Supply Continuity: Active manufacturing status of the RJSAE538E08 provides ongoing supply assurance for current and future applications.

Frequently Asked Questions (FAQ)

Q: Are the RJSNE538E08 and RJSAE538E08 mechanically interchangeable?

A: Yes. Both components share identical 8p8c RJ45 jack configuration, 90° right-angle orientation, through-hole solder termination, and shielded EMI design. Mounting footprints and board integration requirements are equivalent.

Q: What is the key difference between these two part numbers?

A: The primary distinction is product status and availability. The RJSNE538E08 is obsolete, while the RJSAE538E08 is an active product with current manufacturing and inventory support.

Q: Can the RJSAE538E08 be used in applications originally designed for the RJSNE538E08?

A: Yes. Electrical performance, thermal ratings, contact specifications, and mechanical dimensions are equivalent across all parameters provided. Direct substitution is appropriate for board redesigns or new production runs.

Q: Are there any compliance considerations when substituting these parts?

A: Both components are RoHS compliant. No additional compliance certification changes are required when substituting the RJSAE538E08 for the RJSNE538E08.

Q: What does the tab direction "Up and Down" specification indicate?

A: This indicates the connector's locking mechanism features tabs on both top and bottom surfaces, providing mechanical retention in both orientations and enhancing board-level installation security.