RJSNE528C08 Equivalent & Substitute Parts

Part Overview

The RJSNE528C08 is a Jack Modular Connector (RJ45/Ethernet) with 8 positions, 8 contacts (8p8c) in a 90° right-angle orientation manufactured by Amphenol ICC. This component features solder termination and is designed for through-hole mounting applications. The product is currently listed as obsolete, necessitating identification of functionally compatible alternative components for ongoing system support and new designs.

Substiute Parts

RJSNE528C08

Amphenol ICC (Commercial Products)In Stock: 1201RJSNE528C08 Datasheet

Current PartRFQ

RJSAE508B08

Amphenol ICC (Commercial Products)In Stock: 1054RJSAE508B08 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The RJSNE528C08 can be substituted with the RJSAE508B08 based on the following matching critical parameters:

Matched Parameters:

• Connector type: Jack
• Contact configuration: 8p8c (RJ45, Ethernet)
• Number of ports: 8
• Number of rows: 2
• Mounting type: Through Hole
• Orientation: 90° Angle (Right)
• Termination: Solder
• Contact material: Phosphor Bronze
• Contact finish: Gold (50.0µin / 1.27µm)
• Housing material: Thermoplastic
• RoHS Compliance: Both parts are RoHS Compliant
• Moisture Sensitivity Level: Both rated MSL 1 (Unlimited)

Distinguishing Feature: The primary distinction is that the RJSAE508B08 includes Board Lock feature and is classified as Unshielded, whereas shielding status for the main part is not specified.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE508B08 is classified as an active product from Amphenol ICC, providing supply chain continuity for obsolete RJSNE528C08 applications. Both components share identical core electrical and mechanical characteristics for 8p8c (RJ45, Ethernet) jack modular connectors with 90° right-angle solder termination. The RJSAE508B08 extends the lower operating temperature limit to -55°C compared to the -40°C minimum of the original part, providing a wider thermal operating envelope. Both parts maintain RoHS compliance and unlimited moisture sensitivity levels, supporting deployment in regulated environments.

Frequently Asked Questions (FAQ)

Q: What are the core substitution criteria for the RJSNE528C08? A: Substitution is based on matching the following parameters: 8p8c (RJ45, Ethernet) connector type, Jack configuration, Through Hole mounting, 90° right-angle orientation, and solder termination. Contact material (Phosphor Bronze) and finish (Gold, 50.0µin) must remain consistent.

Q: Is the RJSAE508B08 fully compatible as a direct replacement? A: The RJSAE508B08 matches all critical electrical and mechanical parameters of the RJSNE528C08. The RJSAE508B08 adds Board Lock feature and specifies Unshielded configuration, while the original part's shielding status is not specified. The RJSAE508B08 also provides an extended lower operating temperature limit of -55°C versus -40°C.

Q: Why is the RJSNE528C08 listed as obsolete? A: Product obsolescence typically results from manufacturer discontinuation. The RJSAE508B08 represents the active alternative from the same manufacturer with maintained functional compatibility.

Q: What is the difference between Unshielded and the original part's shielding specification? A: The original RJSNE528C08 does not specify a shielding designation. The RJSAE508B08 explicitly states Unshielded construction. This distinction should be evaluated based on application electromagnetic interference requirements.

Q: Do both parts support the same thermal operating range? A: The RJSAE508B08 supports -55°C to 85°C, extending the lower temperature limit compared to the RJSNE528C08 (-40°C to 85°C). Applications requiring operation below -40°C benefit from the wider thermal specification of the substitute.

Q: Are both parts RoHS compliant? A: Both the RJSNE528C08 and RJSAE508B08 are RoHS Compliant and classified as Moisture Sensitivity Level 1 (Unlimited), meeting environmental and reliability standards for regulated applications.