RJSNE508VA8

Part Overview

The RJSNE508VA8 is a modular connector jack featuring 8-position 8-contact (8p8c) RJ45 Ethernet configuration in 90° right-angle orientation with unshielded design. Manufactured by Amphenol ICC (Commercial Products), this through-hole solder termination connector is currently classified as obsolete, necessitating identification of suitable alternative components for continued system support and component procurement.

Substiute Parts

RJSNE508VA8

Amphenol ICC (Commercial Products)In Stock: 1112RJSNE508VA8 Datasheet

Current PartRFQ

RJSAE508VA8

Amphenol ICC (Commercial Products)In Stock: 783RJSAE508VA8 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RJSNE508VA8 is determined by strict equivalence in the following critical electrical and mechanical parameters:

• Connector Configuration: 8p8c (RJ45, Ethernet) contacts required
• Physical Orientation: 90° right-angle mounting orientation
• Mounting Interface: Through-hole PCB termination compatibility
• Termination Type: Solder connection method
• Shielding Classification: Unshielded design requirement
• Contact Specifications: Phosphor Bronze material with Gold finish (50.0µin minimum thickness)
• Housing Material: Thermoplastic construction
• LED Indicator Color: Red and Green LED functionality

The RJSAE508VA8 is identified as a direct substitute based on matching all critical mechanical and electrical parameters specified above.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE508VA8 serves as the primary active substitute for the obsolete RJSNE508VA8. Both components are manufactured by Amphenol ICC and maintain identical mechanical and electrical specifications across all critical parameters including connector configuration, orientation, termination method, and contact characteristics. Both components satisfy RoHS compliance requirements and share the same HTSUS tariff classification (8536.69.4040).

The operating temperature range specification for the RJSAE508VA8 (-40°C to 70°C) is more limited than the original part (-40°C to 85°C) and must be evaluated against system thermal requirements. The RJSAE508VA8 carries active product status with current manufacturing availability, ensuring long-term supply continuity for new designs and system maintenance applications.

Frequently Asked Questions (FAQ)

Q: What is the critical difference between RJSNE508VA8 and RJSAE508VA8?

A: The primary operational difference is product status: RJSNE508VA8 is obsolete while RJSAE508VA8 is active. The operating temperature range differs—RJSNE508VA8 supports -40°C to 85°C, whereas RJSAE508VA8 operates within -40°C to 70°C. All other electrical and mechanical specifications are identical.

Q: Can RJSAE508VA8 be used in applications requiring the full -40°C to 85°C temperature range?

A: No. The RJSAE508VA8 operating temperature maximum of 70°C is the limiting constraint. Applications requiring operation above 70°C must source components with specifications supporting the extended temperature range. Thermal stress testing within the application's actual operating environment is necessary to confirm compatibility.

Q: Are the physical dimensions and PCB footprints identical between these two connectors?

A: Both components share identical mechanical specifications for 90° right-angle through-hole mounting, 8p8c configuration, and thermoplastic housing. PCB footprints are mechanically compatible. Pin alignment and soldering pad patterns are equivalent, enabling direct drop-in replacement at the component level.

Q: What is the significance of the LED indicator specifications in these connectors?

A: Both connectors include integrated Red and Green LED indicators for network activity and link status signaling. The LED color specification is identical across both parts, ensuring equivalent functional indication capability in network interface applications.

Q: Why is the Moisture Sensitivity Level (MSL) listed as "Not Applicable" for RJSAE508VA8?

A: The MSL designation applies specifically to moisture-sensitive semiconductor devices requiring controlled storage and handling. Modular connector components with plastic housings and metal contacts do not fall under MSL categorization, hence "Not Applicable" indicates standard storage conditions are acceptable.