RJSNE508T08 Equivalent & Substitute Parts

Part Overview

The RJSNE508T08 is a modular jack connector manufactured by Amphenol ICC (Commercial Products) designed for 8-position 8-contact (8p8c) RJ45 Ethernet applications. This connector features a 90° right-angle orientation with through-hole solder termination and unshielded construction. The part is classified as obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements. Substitute parts must maintain electrical and mechanical compatibility while meeting current product availability and compliance standards.

Substiute Parts

RJSNE508T08

Amphenol ICC (Commercial Products)In Stock: 1091RJSNE508T08 Datasheet

Current PartRFQ

RJSAE508T08

Amphenol ICC (Commercial Products)In Stock: 863RJSAE508T08 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RJSNE508T08 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Jack
• Contact Configuration: 8p8c (RJ45, Ethernet)
• Number of Ports: 8
• Number of Rows: 2
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Termination Method: Solder
• Shielding: Unshielded
• Contact Material: Phosphor Bronze
• Contact Finish: Gold at 50.0µin (1.27µm)
• Housing Material: Thermoplastic
• Tab Direction: Up and Down
• LED Color: Red - Red
• RoHS Compliance: Compliant
• HTSUS Code: 8536.69.4040

The RJSAE508T08 qualifies as a direct substitute based on complete alignment with all mandatory parameters. Both parts are manufactured by Amphenol ICC (Commercial Products) and share identical electrical and mechanical specifications for 8p8c RJ45 Ethernet jack applications with right-angle through-hole solder termination.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE508T08 is the qualified substitute for the obsolete RJSNE508T08. Both parts are manufactured by Amphenol ICC (Commercial Products) and maintain complete electrical and mechanical compatibility for 8p8c RJ45 Ethernet jack applications.

Selection Basis:

The RJSAE508T08 provides direct functional equivalence with all critical parameters aligned to the original RJSNE508T08 specification. The substitute part is currently in active production status, ensuring supply chain continuity and availability for new designs and production runs.

Operating Temperature Consideration:

The RJSAE508T08 operates within the range of -40°C to 70°C, compared to the RJSNE508T08 range of -40°C to 85°C. Applications requiring operation above 70°C must evaluate thermal requirements against the substitute part's maximum operating temperature specification.

Compliance Status:

Both parts maintain RoHS compliance and share identical HTSUS classification (8536.69.4040), supporting regulatory and tariff consistency in component selection.

Frequently Asked Questions (FAQ)

Q: Can the RJSAE508T08 be used as a direct replacement for the RJSNE508T08 in existing designs?

A: Yes. The RJSAE508T08 provides direct substitution for the RJSNE508T08 across all electrical and mechanical parameters, including connector type, contact configuration, mounting orientation, termination method, and contact materials. Both parts are 8p8c RJ45 Ethernet jacks with 90° right-angle through-hole solder termination and unshielded construction.

Q: What is the primary difference between these two parts?

A: The RJSNE508T08 is classified as obsolete, while the RJSAE508T08 is in active production. Additionally, the RJSAE508T08 has a maximum operating temperature of 70°C compared to 85°C for the RJSNE508T08. All other electrical and mechanical specifications are identical.

Q: Are there any PCB layout or footprint changes required when switching from RJSNE508T08 to RJSAE508T08?

A: No. Both parts share identical mounting type (through hole), orientation (90° right angle), and tab direction (up and down). PCB footprints and layout requirements remain unchanged.

Q: Do both parts have the same LED indicator specifications?

A: Yes. Both the RJSNE508T08 and RJSAE508T08 feature red LED indicators (Red - Red configuration).

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are RoHS compliant and share the same HTSUS tariff code (8536.69.4040).

Q: What should be considered when selecting between these parts for new designs?

A: For new designs, the RJSAE508T08 is the appropriate selection due to its active product status and ongoing manufacturer support. The operating temperature range of -40°C to 70°C is suitable for standard Ethernet and networking applications. Applications requiring operation above 70°C should evaluate alternative connector solutions.