RJSNE508F08 Equivalent & Substitute Parts

Part Overview

The RJSNE508F08 is a modular jack connector manufactured by Amphenol ICC (Commercial Products), designed for 8p8c (RJ45, Ethernet) applications. This connector features a 90° right-angle orientation, unshielded design, and through-hole solder termination. The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing procurement and design requirements.

Substiute Parts

RJSNE508F08

Amphenol ICC (Commercial Products)In Stock: 1021RJSNE508F08 Datasheet

Current PartRFQ

RJSAE508F08

Amphenol ICC (Commercial Products)In Stock: 879RJSAE508F08 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RJSNE508F08 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Jack
• Number of Positions/Contacts: 8p8c (RJ45, Ethernet)
• Number of Ports: 8
• Number of Rows: 2
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Termination: Solder
• Shielding: Unshielded
• Contact Material: Phosphor Bronze
• Contact Finish: Gold
• Contact Finish Thickness: 50.0µin (1.27µm)
• Housing Material: Thermoplastic
• RoHS Status: RoHS Compliant

The RJSAE508F08 meets all mandatory matching parameters and qualifies as a direct substitute. Both connectors share identical mechanical and electrical interface specifications, enabling direct replacement in applications requiring 8p8c modular jack connectors with right-angle through-hole solder termination.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE508F08 is the qualified substitute for the obsolete RJSNE508F08. Both components are manufactured by Amphenol ICC (Commercial Products) and maintain full compliance with RoHS standards. The RJSAE508F08 holds active product status, ensuring continued availability and supply chain reliability.

The primary operational difference is the maximum operating temperature specification: RJSNE508F08 operates to 85°C, while RJSAE508F08 operates to 70°C. Applications requiring sustained operation above 70°C must evaluate this thermal limitation against specific use-case requirements.

All mechanical, electrical, and interface parameters are identical between the two connectors, supporting direct substitution in PCB designs and assembly processes without modification to footprints, routing, or termination procedures.

Frequently Asked Questions (FAQ)

Q: Can RJSAE508F08 be used as a direct replacement for RJSNE508F08?

A: Yes. Both connectors share identical specifications for connector type, contact configuration (8p8c RJ45), mounting method (through-hole solder), orientation (90° right-angle), and physical dimensions. Direct substitution is supported without design modification.

Q: What is the significance of the operating temperature difference?

A: The RJSNE508F08 specifies -40°C to 85°C operating range, while the RJSAE508F08 specifies -40°C to 70°C. Applications operating continuously above 70°C must confirm compatibility with the RJSAE508F08 thermal rating or identify alternative solutions.

Q: Are both connectors RoHS compliant?

A: Yes. Both RJSNE508F08 and RJSAE508F08 are RoHS compliant, meeting environmental and regulatory requirements for commercial and industrial applications.

Q: What does the obsolete status of RJSNE508F08 mean for procurement?

A: Obsolete status indicates the RJSNE508F08 is no longer manufactured and existing inventory is limited. The RJSAE508F08, with active product status, provides assured long-term availability and supply continuity.

Q: Are the LED indicators identical on both connectors?

A: Yes. Both connectors feature Green and Yellow LED indicators with Yellow as the secondary color, providing identical visual feedback functionality.

Q: Do both connectors use the same contact material and finish?

A: Yes. Both employ phosphor bronze contacts with gold plating at 50.0µin (1.27µm) thickness, ensuring equivalent electrical performance and corrosion resistance.