RJSNE5087A8 Equivalent & Substitute Parts

Part Overview

The RJSNE5087A8 is a modular jack connector manufactured by Amphenol ICC (Commercial Products). This 8p8c (RJ45, Ethernet) connector features a 90° right-angle orientation with unshielded design and integrated LED indicators (Red-Green). The connector utilizes through-hole solder termination and is housed in thermoplastic material with phosphor bronze contacts finished in gold.

The RJSNE5087A8 carries an obsolete product status. Identifying equivalent substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production or maintenance requirements for systems utilizing this connector.

Substiute Parts

RJSNE5087A8

Amphenol ICC (Commercial Products)In Stock: 801RJSNE5087A8 Datasheet

Current PartRFQ

RJSAE5087A8

Amphenol ICC (Commercial Products)In Stock: 1093RJSAE5087A8 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RJSNE5087A8 is determined by strict alignment across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Jack
• Number of Positions/Contacts: 8p8c (RJ45, Ethernet)
• Number of Ports: 8
• Number of Rows: 2
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Termination: Solder
• Shielding: Unshielded
• LED Color: Red - Green
• Tab Direction: Up and Down
• Contact Material: Phosphor Bronze
• Contact Finish: Gold
• Contact Finish Thickness: 50.0µin (1.27µm)
• Housing Material: Thermoplastic
• RoHS Compliance: Required

The RJSAE5087A8 qualifies as a direct substitute based on complete alignment with all mandatory parameters. Both connectors share identical mechanical, electrical, and material specifications within their respective operational temperature ranges.

Parameter Comparison

Engineering Selection Recommendations

RJSNE5087A8 (Obsolete Status)

The RJSNE5087A8 is classified as obsolete. New designs should not incorporate this part number. Existing systems utilizing this connector require transition planning to active alternatives.

RJSAE5087A8 (Active Status - Recommended Substitute)

The RJSAE5087A8 is the direct equivalent substitute for the RJSNE5087A8. This part maintains active product status with Amphenol ICC (Commercial Products) and carries full RoHS compliance certification. All mechanical, electrical, and material specifications align with the obsolete predecessor.

Temperature Range Consideration

The RJSAE5087A8 operates within -40°C to 70°C, compared to the RJSNE5087A8 range of -40°C to 85°C. Applications requiring operation above 70°C must evaluate this specification difference against system requirements.

Inventory and Availability

The RJSAE5087A8 maintains higher inventory levels (1,083 pcs) compared to the RJSNE5087A8 (727 pcs), supporting improved supply chain continuity for new procurements.

Frequently Asked Questions (FAQ)

Q: Can the RJSAE5087A8 directly replace the RJSNE5087A8 in existing designs?

A: Yes. The RJSAE5087A8 matches all critical mechanical, electrical, and material parameters of the RJSNE5087A8. Both connectors feature identical 8p8c (RJ45, Ethernet) configurations, 90° right-angle orientation, through-hole solder termination, unshielded design, and Red-Green LED indicators. Footprint and pinout compatibility are maintained.

Q: What is the primary difference between these two part numbers?

A: The RJSNE5087A8 is obsolete, while the RJSAE5087A8 maintains active product status. The RJSAE5087A8 also operates within a narrower temperature range (-40°C to 70°C versus -40°C to 85°C).

Q: Are there any compliance or certification differences?

A: Both connectors carry RoHS compliance certification. The RJSNE5087A8 specifies Moisture Sensitivity Level (MSL) 1 (Unlimited), while the RJSAE5087A8 lists MSL as Not Applicable. Both are manufactured by Amphenol ICC (Commercial Products) and share identical HTSUS classification (8536.69.4040).

Q: What should I consider when transitioning from RJSNE5087A8 to RJSAE5087A8?

A: Verify that your application's maximum operating temperature does not exceed 70°C. If sustained operation above 70°C is required, alternative connector solutions must be evaluated. For all other parameters, direct substitution is supported without design modification.

Q: Are the contact materials and finishes identical?

A: Yes. Both connectors utilize phosphor bronze contacts with gold finish at 50.0µin (1.27µm) thickness, ensuring equivalent electrical performance and reliability characteristics.