RJSNE5080A8 Equivalent & Substitute Parts

Part Overview

The RJSNE5080A8 is a jack modular connector manufactured by Amphenol ICC (Commercial Products) designed for 8p8c (RJ45, Ethernet) applications. This connector features a 90° right-angle orientation, through-hole solder termination, and unshielded construction. The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing procurement and new design implementations. Substitute parts must maintain electrical and mechanical compatibility while offering current product availability.

Substiute Parts

RJSNE5080A8

Amphenol ICC (Commercial Products)In Stock: 1033RJSNE5080A8 Datasheet

Current PartRFQ

RJSAE5080A8

Amphenol ICC (Commercial Products)In Stock: 933RJSAE5080A8 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RJSNE5080A8 is based on strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Connector type: Jack
• Contact configuration: 8p8c (RJ45, Ethernet)
• Contact material: Phosphor Bronze
• Contact finish: Gold at 50.0µin (1.27µm)
• Shielding: Unshielded

Mechanical Compatibility Parameters:

• Orientation: 90° Angle (Right)
• Mounting type: Through Hole
• Termination method: Solder
• Housing material: Thermoplastic
• Tab direction: Up and Down

Environmental & Compliance Parameters:

• RoHS Compliance: Required
• Moisture Sensitivity Level: 1 (Unlimited)
• Operating temperature range: Must support minimum -40°C to 85°C

The RJSNE5080A8 is obsolete; therefore, active equivalent parts from the same manufacturer series are identified to ensure design continuity and procurement viability.

Parameter Comparison

Engineering Selection Recommendations

The RJSAE5080A8 is the direct equivalent substitute for the obsolete RJSNE5080A8. Both parts are manufactured by Amphenol ICC (Commercial Products) and maintain identical electrical and mechanical specifications across all critical parameters.

Substitution Basis:

The RJSAE5080A8 satisfies all functional requirements of the RJSNE5080A8:

• Identical 8p8c (RJ45, Ethernet) jack configuration
• Matching 90° right-angle through-hole solder termination
• Equivalent phosphor bronze contacts with 50.0µin gold finish
• Identical thermoplastic housing with up-and-down tab direction
• Full RoHS compliance and MSL 1 rating

Operational Advantage:

The RJSAE5080A8 features an extended operating temperature range of -55°C to 85°C, compared to the RJSNE5080A8 range of -40°C to 85°C. This provides additional thermal margin for applications requiring lower temperature operation.

Availability Status:

The RJSAE5080A8 is classified as active product with current manufacturing status, ensuring long-term procurement availability and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the RJSAE5080A8 directly replace the RJSNE5080A8 in existing designs?

A: Yes. The RJSAE5080A8 is a direct functional equivalent. All electrical and mechanical parameters match the RJSNE5080A8, including connector type, contact configuration, orientation, mounting method, and termination. No design modifications are required.

Q: What is the difference between the RJSNE5080A8 and RJSAE5080A8?

A: The primary differences are product status and operating temperature range. The RJSNE5080A8 is obsolete with an operating range of -40°C to 85°C. The RJSAE5080A8 is active production with an extended operating range of -55°C to 85°C. All other specifications are identical.

Q: Are there packaging differences between these parts?

A: The RJSNE5080A8 packaging is not specified in the available data. The RJSAE5080A8 is supplied in Tray packaging. Confirm packaging requirements with your procurement specification.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. Both the RJSNE5080A8 and RJSAE5080A8 are RoHS Compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: What is the contact finish specification for these connectors?

A: Both parts feature gold-plated phosphor bronze contacts with a finish thickness of 50.0µin (1.27µm), ensuring consistent electrical performance and corrosion resistance.

Q: Can these connectors be used in shielded applications?

A: No. Both the RJSNE5080A8 and RJSAE5080A8 are unshielded connectors. For shielded applications, alternative connector designs must be specified.

Q: What is the tab direction specification?

A: Both connectors feature Up and Down tab direction, providing mechanical retention in both orientations during mating operations.