RJS6R0 Equivalent & Substitute Parts

Part Overview

The RJS6R0 is a 6 Ohm, 50W wirewound linear potentiometer manufactured by Ohmite, designed for panel mount applications with solder lug termination. This component is currently active in production with 679 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when specific compliance requirements must be met.

Substiute Parts

RJS6R0

OhmiteIn Stock: 723RJS6R0 Datasheet

Current PartRFQ

RJS6R0E

OhmiteIn Stock: 725RJS6R0E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RJS6R0 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part RJS6R0E maintains identical specifications for resistance value, power rating, taper characteristic, number of turns, gang configuration, resistive material composition, termination method, mounting configuration, rotation angle, bushing thread size, body dimensions, and actuator geometry. The primary distinction between the main part and its substitute is the RoHS compliance status, where RJS6R0E achieves ROHS3 compliance while the RJS6R0 remains RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

The RJS6R0E serves as a direct electrical and mechanical equivalent to the RJS6R0. Both parts are manufactured by Ohmite and maintain active product status. Selection between these parts should be based on regulatory compliance requirements. The RJS6R0E is suitable for applications requiring ROHS3 compliance and REACH unaffected status. The RJS6R0 remains appropriate for applications without RoHS compliance mandates. Both parts are functionally interchangeable in circuit design and mechanical installation, with identical electrical performance characteristics and physical dimensions.

Frequently Asked Questions (FAQ)

Q: Can RJS6R0E replace RJS6R0 in all applications? A: Yes. The RJS6R0E is electrically and mechanically identical to the RJS6R0. The only difference is RoHS compliance status. Selection depends on whether your application or region requires ROHS3 compliance.

Q: Are the physical dimensions identical between RJS6R0 and RJS6R0E? A: Yes. Both parts have identical body size (2.310" diameter), actuator dimensions (0.875" length, 0.250" diameter), bushing thread (3/8-32), and all mounting specifications.

Q: What is the resistance tolerance for these potentiometers? A: Both the RJS6R0 and RJS6R0E have a tolerance of ±10% on the 6 Ohm resistance value.

Q: Are these parts suitable for high-power applications? A: Yes. Both parts are rated for 50W continuous power dissipation with wirewound resistive material construction.

Q: What is the rotation angle for these potentiometers? A: Both parts feature a 300° rotation angle with linear taper characteristic.

Q: Do these parts require any special handling or storage? A: Moisture Sensitivity Level is Not Applicable for both parts, indicating standard handling and storage conditions are acceptable.