RJS6005TDPP-EJ#T2 Equivalent & Substitute Parts

Part Overview

The RJS6005TDPP-EJ#T2 is a Silicon Carbide (SiC) Schottky diode manufactured by Renesas Electronics Corporation, rated for 600 V DC reverse voltage and 15 A average rectified current in a Through Hole TO-220FP-2L package. This component is classified as Obsolete, necessitating identification of equivalent substitute parts for ongoing design requirements and procurement needs. The part is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Substiute Parts

RJS6005TDPP-EJ#T2

Renesas Electronics CorporationIn Stock: 920RJS6005TDPP-EJ#T2 Datasheet

Current PartRFQ

VS-APH3006-N3

Vishay General Semiconductor - Diodes DivisionIn Stock: 1448VS-APH3006-N3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RJS6005TDPP-EJ#T2 is determined by the following critical electrical and mechanical parameters:

Voltage Rating Compatibility: The substitute part must maintain the 600 V DC reverse voltage rating to ensure safe operation within the same circuit topology.

Current Handling Capacity: The substitute part must support at least 15 A average rectified current. Parts with higher current ratings (such as 30 A) are acceptable as they provide additional design margin without compromising circuit function.

Reverse Recovery Time: The substitute part must meet the fast recovery classification (≤ 500ns, > 200mA) to maintain switching performance characteristics.

Mounting Configuration: The substitute part must be Through Hole mounted to ensure mechanical compatibility with existing PCB layouts.

Compliance Standards: The substitute part must maintain ROHS3 compliance and EAR99 ECCN classification to satisfy regulatory and export requirements.

The identified substitute, VS-APH3006-N3, satisfies all critical substitution criteria while offering enhanced current capacity and extended operating temperature range.

Parameter Comparison

Engineering Selection Recommendations

The VS-APH3006-N3 is the identified substitute for the obsolete RJS6005TDPP-EJ#T2. Selection of this substitute is based on the following engineering criteria:

Regulatory Compliance: Both parts maintain ROHS3 compliance and EAR99 ECCN classification, ensuring continued adherence to environmental and export regulations.

Product Availability: The RJS6005TDPP-EJ#T2 is classified as Obsolete, while the VS-APH3006-N3 maintains Active product status with confirmed inventory availability (1407 units in stock), ensuring long-term procurement viability.

Electrical Parameter Alignment: The substitute part matches the 600 V reverse voltage rating and exceeds the 15 A current requirement with a 30 A rating, providing additional design margin. Both parts meet the fast recovery speed classification.

Thermal Operating Range: The VS-APH3006-N3 extends the maximum junction temperature to 175°C compared to 150°C for the original part, offering improved thermal performance in high-temperature applications.

Package Consideration: The substitute uses a TO-247-3 package instead of the original TO-220-2 package. PCB layout modification is required to accommodate the different pin configuration and physical dimensions.

Frequently Asked Questions (FAQ)

Q: Can the VS-APH3006-N3 directly replace the RJS6005TDPP-EJ#T2 without PCB modification?

A: No. While both parts are Through Hole mounted diodes with identical voltage ratings, the package types differ (TO-220-2 versus TO-247-3). PCB layout changes are required to accommodate the different pin spacing and physical footprint of the TO-247-3 package.

Q: What is the significance of the higher 30 A current rating on the substitute part?

A: The VS-APH3006-N3 is rated for 30 A average rectified current, compared to 15 A for the original part. This higher rating provides additional design margin and allows the substitute to handle increased current loads without thermal stress, making it suitable for applications requiring higher current capacity.

Q: Are there differences in switching performance between these two diodes?

A: Both parts meet the fast recovery classification (≤ 500ns, > 200mA). The reverse recovery time differs slightly: 15 ns for the RJS6005TDPP-EJ#T2 versus 26 ns for the VS-APH3006-N3. This difference is within the fast recovery category and does not prevent functional substitution in standard rectification applications.

Q: What is the impact of the forward voltage difference?

A: The forward voltage specifications are measured at different current levels: 1.8 V @ 15 A for the original part and 2.65 V @ 30 A for the substitute. Direct comparison at identical current levels is not possible from the provided data. Circuit thermal analysis should account for the higher forward voltage when operating at maximum rated current.

Q: Does the extended temperature range of the substitute part affect compatibility?

A: The VS-APH3006-N3 operates from -55°C to 175°C, compared to -55°C to 150°C for the original part. This extended upper temperature limit provides improved performance in high-temperature environments and does not create compatibility issues for applications within the original temperature range.

Q: Are both parts compliant with current environmental regulations?

A: Yes. Both the RJS6005TDPP-EJ#T2 and VS-APH3006-N3 are ROHS3 compliant and carry EAR99 ECCN classification, meeting current environmental and export requirements.