RJS6004TDPP-EJ#T2 Equivalent & Substitute Parts

Part Overview

The RJS6004TDPP-EJ#T2 is a Silicon Carbide (SiC) Schottky diode manufactured by Renesas Electronics Corporation, rated for 600 V DC reverse voltage and 10 A average rectified current in a Through Hole TO-220FP-2L package. This component is classified as Obsolete, necessitating identification of equivalent substitute parts for ongoing design requirements and procurement needs. The diode features fast recovery characteristics with a reverse recovery time of 15 ns, making it suitable for high-frequency switching applications.

Substiute Parts

RJS6004TDPP-EJ#T2

Renesas Electronics CorporationIn Stock: 1050RJS6004TDPP-EJ#T2 Datasheet

Current PartRFQ

STPSC10H065DI

STMicroelectronicsIn Stock: 2191STPSC10H065DI Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RJS6004TDPP-EJ#T2 is determined by the following critical electrical and mechanical parameters:

Electrical Compatibility Criteria:

• Voltage - DC Reverse (Vr) rating must equal or exceed 600 V
• Current - Average Rectified (Io) must equal or exceed 10 A
• Technology classification as SiC Schottky diode
• Forward voltage (Vf) characteristics within acceptable operating range
• Fast recovery speed classification (≤ 500 ns, > 200 mA)

Mechanical Compatibility Criteria:

• Through Hole mounting type
• TO-220 package family (TO-220-2 or TO-220AC insulated variants)
• Pin configuration compatible with TO-220 footprints

Compliance and Status Criteria:

• RoHS3 compliance maintained
• Active or current product status preferred for long-term availability
• MSL rating of 1 (Unlimited) for storage flexibility

The STPSC10H065DI from STMicroelectronics meets these substitution criteria with equivalent electrical performance and enhanced voltage rating.

Parameter Comparison

Engineering Selection Recommendations

The STPSC10H065DI from STMicroelectronics is a direct substitute for the obsolete RJS6004TDPP-EJ#T2. The substitute part provides the following advantages:

Product Status: The STPSC10H065DI maintains Active product status, ensuring long-term availability and supply chain continuity compared to the Obsolete RJS6004TDPP-EJ#T2.

Electrical Performance: The substitute part exceeds the voltage specification with a 650 V DC reverse rating versus the original 600 V specification, providing additional design margin. Forward voltage is improved at 1.75 V compared to 1.8 V at 10 A, resulting in lower power dissipation. Both parts maintain identical 10 A average rectified current ratings and fast recovery speed classification.

Compliance: Both parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with existing procurement and storage protocols.

Package Compatibility: Both parts utilize Through Hole mounting in the TO-220 package family. The substitute employs TO-220AC insulated packaging, which is mechanically and electrically compatible with TO-220-2 footprints. Pin configuration remains identical for direct board-level substitution.

Temperature Range: The substitute part extends the upper operating temperature limit to 175°C compared to 150°C, providing enhanced thermal margin for high-temperature applications.

Frequently Asked Questions (FAQ)

Q: Can the STPSC10H065DI directly replace the RJS6004TDPP-EJ#T2 on existing PCBs?

A: Yes. Both parts are Through Hole mounted in compatible TO-220 package variants with identical pin configurations. The TO-220AC insulated package of the substitute is mechanically and electrically compatible with TO-220-2 footprints. No PCB modifications are required.

Q: What is the difference between TO-220-2 Full Pack and TO-220AC insulated packaging?

A: Both are TO-220 package variants with identical pin spacing and Through Hole mounting. The TO-220AC designation indicates an insulated version with enhanced isolation properties. Both are compatible with standard TO-220 footprints.

Q: Does the higher voltage rating of the STPSC10H065DI (650 V vs. 600 V) affect circuit operation?

A: No. The higher voltage rating provides additional design margin and does not negatively impact circuit performance. The diode will operate identically in circuits designed for 600 V operation.

Q: Why is the reverse leakage current higher in the STPSC10H065DI (100 µA @ 650 V vs. 10 µA @ 600 V)?

A: Reverse leakage current is measured at different voltage levels. The STPSC10H065DI is specified at its maximum rated voltage (650 V), while the original part is specified at 600 V. This difference reflects the measurement conditions rather than inferior performance at equivalent voltage levels.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the RJS6004TDPP-EJ#T2 and STPSC10H065DI are ROHS3 compliant, ensuring compatibility with environmental and regulatory requirements.

Q: What is the advantage of the lower forward voltage in the STPSC10H065DI?

A: The forward voltage of 1.75 V in the STPSC10H065DI compared to 1.8 V in the original part results in reduced power dissipation during forward conduction. This translates to lower heat generation and improved thermal efficiency in the application.

Q: Can I use the STPSC10H065DI in applications requiring the full -55°C to 150°C temperature range of the original part?

A: Yes. The STPSC10H065DI operates from -40°C to 175°C, which encompasses the upper portion of the original temperature range. For applications requiring operation below -40°C, the original part specifications must be consulted.