RJK60S7DPP-E0#T2 Equivalent & Substitute Parts

Part Overview

The RJK60S7DPP-E0#T2 is an N-Channel 600V 30A MOSFET manufactured by Renesas Electronics Corporation in a TO-220FP through-hole package. This device is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design requirements and production continuity. The part operates at a maximum junction temperature of 150°C with a power dissipation rating of 34.7W and features a gate charge specification of 39 nC at 10V drive voltage.

Substiute Parts

RJK60S7DPP-E0#T2

Renesas Electronics CorporationIn Stock: 847RJK60S7DPP-E0#T2 Datasheet

Current PartRFQ

IPA60R099P6XKSA1

Infineon TechnologiesIn Stock: 1147IPA60R099P6XKSA1 Datasheet

SimilarRFQ

R6030ENX

Rohm SemiconductorIn Stock: 1151R6030ENX Datasheet

SimilarRFQ

R6030KNX

Rohm SemiconductorIn Stock: 2209R6030KNX Datasheet

SimilarRFQ

R6030KNXC7

Rohm SemiconductorIn Stock: 2440R6030KNXC7 Datasheet

SimilarRFQ

STF33N60M2

STMicroelectronicsIn Stock: 15241STF33N60M2 Datasheet

SimilarRFQ

STF34N65M5

STMicroelectronicsIn Stock: 3492STF34N65M5 Datasheet

SimilarRFQ

STF34NM60ND

STMicroelectronicsIn Stock: 4464STF34NM60ND Datasheet

SimilarRFQ

STF38N65M5

STMicroelectronicsIn Stock: 2308STF38N65M5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RJK60S7DPP-E0#T2 is determined by the following critical parameters:

Primary Matching Criteria:

• Drain to Source Voltage (Vdss): 600V or higher
• Continuous Drain Current (Id): 30A or higher at 25°C
• Mounting Type: Through Hole
• Package: TO-220-3 Full Pack (TO-220FP or TO-220FM variants)
• Gate Drive Voltage: 10V
• RoHS3 Compliance

Secondary Compatibility Factors:

• Rds On (Max) @ 10V: Acceptable range 95–130 mOhm
• Gate Charge (Qg) @ 10V: 39–85 nC
• Input Capacitance (Ciss): 1781–3330 pF
• Power Dissipation: 34W or higher
• Operating Temperature: 150°C or higher

Substitute parts must maintain electrical equivalence within these parameter boundaries to ensure direct replacement capability in existing circuit designs without modification to gate drive circuitry, thermal management, or PCB layout.

Parameter Comparison

Engineering Selection Recommendations

Tier 1 Direct Substitutes (Highest Compatibility):

The following parts provide direct electrical and mechanical equivalence to the RJK60S7DPP-E0#T2:

• R6030KNXC7 (Rohm Semiconductor): Identical 600V, 30A rating with TO-220FM package. Active product status with ROHS3 compliance. Tube packaging matches original. Gate charge of 56 nC provides improved switching performance. Extended operating temperature range (-55°C to 150°C) exceeds original specification.

• R6030KNX (Rohm Semiconductor): Identical electrical specifications to R6030KNXC7 with bulk packaging. Active status and full compliance certification. Higher power dissipation rating (86W) provides thermal margin.

• R6030ENX (Rohm Semiconductor): Maintains 600V, 30A core specifications with TO-220FM package. Active product status. Slightly elevated Rds On (130 mOhm) and gate charge (85 nC) remain within acceptable substitution parameters.

Tier 2 Functional Substitutes (Acceptable with Verification):

• STF38N65M5 (STMicroelectronics): 650V rating provides voltage margin. 30A continuous current matches original. Superior Rds On of 95 mOhm reduces conduction losses. TO-220FP package matches original form factor. Active product with extended temperature range.

• IPA60R099P6XKSA1 (Infineon Technologies): 600V, 37.9A rating exceeds original current specification. Superior Rds On of 99 mOhm. CoolMOS™ P6 series technology. Active product with extended operating temperature range. PG-TO220-FP package variant compatible with TO-220FP footprint.

• STF34NM60ND (STMicroelectronics): 600V, 29A rating approaches original specification. Rds On of 110 mOhm provides acceptable performance. TO-220FP package matches original. Active product status with full compliance.

Tier 3 Partial Substitutes (Current Derating Required):

• STF33N60M2 (STMicroelectronics): 600V rating maintained. 26A continuous current represents 13% derating from original 30A specification. Rds On of 125 mOhm matches original. TO-220FP package identical. Active product with extended temperature range. Suitable for applications with reduced current requirements.

• STF34N65M5 (STMicroelectronics): 650V rating provides voltage margin. 28A continuous current represents 7% derating. Rds On of 110 mOhm improves efficiency. TO-220FP package matches original. Active product status.

All substitute parts maintain ROHS3 compliance, MSL Level 1 (Unlimited), and ECCN EAR99 classification consistent with the original component.

Frequently Asked Questions (FAQ)

Q: Can R6030KNXC7 directly replace RJK60S7DPP-E0#T2 without PCB modifications?

A: Yes. Both devices share identical 600V, 30A electrical specifications, 10V gate drive voltage, and TO-220-3 Full Pack mechanical configuration. The R6030KNXC7 operates within the same gate charge and input capacitance ranges, requiring no changes to gate drive circuitry or thermal management design.

Q: What is the difference between R6030KNX and R6030KNXC7?

A: Both parts are electrically identical with 600V, 30A ratings and identical electrical parameters. The primary difference is packaging: R6030KNXC7 is supplied in tube packaging (matching the original RJK60S7DPP-E0#T2), while R6030KNX is supplied in bulk packaging. Both are active products with full compliance certifications.

Q: Why does STF38N65M5 have a higher voltage rating (650V) than the original (600V)?

A: The 650V rating provides additional voltage margin for transient overvoltage protection without affecting normal operation at 600V. The higher voltage rating does not degrade performance in 600V applications and is a common design practice for improved reliability.

Q: Is the IPA60R099P6XKSA1 suitable for direct replacement despite higher current rating (37.9A vs. 30A)?

A: Yes. Higher current rating indicates improved thermal capability and lower on-resistance (99 mOhm vs. 125 mOhm), resulting in reduced power dissipation. The device operates safely at 30A continuous current with enhanced performance margins. Gate drive voltage and package compatibility are maintained.

Q: What is the significance of the TO-220FM versus TO-220FP package designation?

A: Both TO-220FM and TO-220FP are TO-220-3 Full Pack variants with identical mechanical footprints and pin configurations. The designations reflect minor manufacturing process differences between manufacturers. Both are directly compatible on standard TO-220 PCB layouts.

Q: Can STF33N60M2 be used in applications requiring the full 30A rating?

A: No. STF33N60M2 is rated for 26A continuous current, representing a 13% reduction from the original 30A specification. This part is suitable only for applications with maximum current requirements of 26A or lower. For full 30A operation, select parts from Tier 1 or Tier 2 categories.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance status, consistent with the original RJK60S7DPP-E0#T2. All parts also maintain MSL Level 1 (Unlimited) moisture sensitivity classification.

Q: What thermal considerations apply when substituting with higher power dissipation parts like R6030KNX (86W)?

A: Higher power dissipation ratings indicate improved thermal performance and lower on-resistance. These parts generate less heat at equivalent current levels compared to the original 34.7W specification. Existing thermal management designs remain valid; enhanced performance is achieved without additional cooling requirements.

Q: How does gate charge affect switching performance in these substitutes?

A: Gate charge (Qg) determines switching speed and gate drive power requirements. The original part specifies 39 nC at 10V. Substitute parts range from 45.5 nC to 85 nC. Higher gate charge values require slightly longer switching times but remain compatible with standard gate drive circuits designed for 10V operation. No gate driver modifications are necessary.

Q: Which substitute offers the best on-resistance performance?

A: STF38N65M5 provides the lowest Rds On at 95 mOhm (measured at 15A, 10V), compared to the original 125 mOhm. This results in reduced conduction losses and improved efficiency. IPA60R099P6XKSA1 offers 99 mOhm, providing similar performance benefits.