RJK1002DPP-E0#T2 Equivalent & Substitute Parts

Part Overview

The RJK1002DPP-E0#T2 is an N-Channel MOSFET manufactured by Renesas Electronics Corporation, rated for 100V drain-to-source voltage with 70A continuous drain current at 25°C. This device is packaged in a TO-220FP through-hole configuration and is designed for applications requiring moderate power dissipation up to 30W (Tc). The part is currently classified as obsolete, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility for ongoing system support and new designs.

Substiute Parts

RJK1002DPP-E0#T2

Renesas Electronics CorporationIn Stock: 807RJK1002DPP-E0#T2 Datasheet

Current PartRFQ

RJK1002DPP-A0#T2

Renesas Electronics CorporationIn Stock: 1047RJK1002DPP-A0#T2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RJK1002DPP-E0#T2 is determined by strict equivalence across the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• FET Type: N-Channel MOSFET (Metal Oxide Semiconductor)
• Drain to Source Voltage (Vdss): 100V minimum
• Continuous Drain Current (Id) @ 25°C: 70A minimum
• On-State Resistance (Rds On) @ 35A, 10V: 7.6 mOhm maximum
• Gate Charge (Qg) @ 10V: 94 nC maximum
• Input Capacitance (Ciss) @ 10V: 6450 pF maximum
• Gate Voltage Range (Vgs): ±20V minimum
• Power Dissipation (Max): 30W minimum
• Operating Temperature (TJ): 150°C minimum

Mechanical Equivalence Criteria:

• Mounting Type: Through Hole
• Package / Case: TO-220-3 configuration
• Supplier Device Package: TO-220 series

Compliance Criteria:

• RoHS3 Compliance required
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The RJK1002DPP-A0#T2 meets all electrical and mechanical substitution criteria and is classified as an active product, providing long-term availability for replacement applications.

Parameter Comparison

Engineering Selection Recommendations

The RJK1002DPP-A0#T2 is the direct substitute for the obsolete RJK1002DPP-E0#T2. Both devices are manufactured by Renesas Electronics Corporation and share identical electrical specifications across all critical parameters including voltage rating, current capacity, on-state resistance, and thermal characteristics.

Selection Basis:

The RJK1002DPP-A0#T2 is recommended for replacement applications based on the following factors:

1. Product Status: The substitute part is classified as Active, ensuring continued availability and manufacturing support, whereas the main part is Obsolete.

2. Electrical Equivalence: All electrical parameters are identical, including Vdss (100V), Id (70A), Rds On (7.6 mOhm @ 35A, 10V), gate charge (94 nC), and input capacitance (6450 pF).

3. Compliance Alignment: Both parts maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with current manufacturing and environmental standards.

4. Mechanical Compatibility: Both devices utilize TO-220-3 through-hole packaging with identical pin configurations, allowing direct board-level substitution without layout modifications.

5. Thermal Performance: Operating temperature rating of 150°C (TJ) is maintained, with power dissipation specifications remaining equivalent at 30W.

The RJK1002DPP-A0#T2 is supplied in Tube packaging, whereas the main part was supplied in Full Pack configuration. This packaging difference does not affect electrical or mechanical performance and is a standard variation in component distribution.

Frequently Asked Questions (FAQ)

Q: Can the RJK1002DPP-A0#T2 be used as a direct replacement for the RJK1002DPP-E0#T2?

A: Yes. The RJK1002DPP-A0#T2 is a direct substitute with identical electrical specifications and compatible mechanical packaging. All critical parameters including voltage rating, current capacity, on-state resistance, and thermal characteristics are equivalent.

Q: What is the difference between the TO-220FP and TO-220ABA package designations?

A: Both designations refer to TO-220-3 through-hole packages with identical pin configurations and mechanical dimensions. The suffix variation (FP vs. ABA) indicates different manufacturing process codes from Renesas Electronics Corporation but does not affect electrical performance or board-level compatibility.

Q: Why is the main part classified as Obsolete?

A: The RJK1002DPP-E0#T2 has reached end-of-life status in Renesas Electronics Corporation's product portfolio. The RJK1002DPP-A0#T2 is the active equivalent that replaces this obsolete device for new designs and ongoing system support.

Q: Are there any compliance differences between the two parts?

A: Both parts are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity ratings. The main part is REACH Affected, while the substitute is REACH Unaffected. Both maintain EAR99 export classification and identical HTSUS codes (8541.29.0095).

Q: What is the gate threshold voltage (Vgs(th)) for the substitute part?

A: The RJK1002DPP-A0#T2 specifies a gate threshold voltage of 4V @ 1mA. This parameter was not provided for the main part but is within typical specifications for this device class.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. Both parts use identical TO-220-3 through-hole packaging with the same pin configuration and mechanical footprint. No PCB layout modifications are required for substitution.

Q: What inventory status should be considered when selecting between these parts?

A: The RJK1002DPP-A0#T2 is the recommended selection for new designs and long-term applications due to its Active product status. The main part (RJK1002DPP-E0#T2) is Obsolete and should not be specified for new designs, though existing inventory may be available for legacy system support.