RJ0805FRE076R2L Equivalent & Substitute Parts

Part Overview

The RJ0805FRE076R2L is a 6.2 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO, this component features moisture-resistant construction with a temperature coefficient of ±50ppm/°C and operating range of -55°C to 125°C. The part is currently obsolete, necessitating identification of equivalent and substitute components that maintain electrical and mechanical compatibility while offering improved availability and performance characteristics.

Substiute Parts

RJ0805FRE076R2L

YAGEOIn Stock: 1028RJ0805FRE076R2L Datasheet

Current PartRFQ

RT0805DRE076R2L

YAGEOIn Stock: 2215RT0805DRE076R2L Datasheet

UpgradeRFQ

RT0805FRE076R2L

YAGEOIn Stock: 892RT0805FRE076R2L Datasheet

UpgradeRFQ

CPF0805B6R2E1

TE Connectivity Passive ProductIn Stock: 3207CPF0805B6R2E1 Datasheet

UpgradeRFQ

RNCF0805BTC6R20

Stackpole Electronics IncIn Stock: 1059RNCF0805BTC6R20 Datasheet

MFR RecommendedRFQ

RNCF0805DTC6R20

Stackpole Electronics IncIn Stock: 1114RNCF0805DTC6R20 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RJ0805FRE076R2L is determined by the following critical parameters:

• Resistance Value: All substitutes must be 6.2 Ohms
• Package / Case: All substitutes must be 0805 (2012 Metric) for PCB footprint compatibility
• Composition: Thin film construction maintains electrical performance characteristics
• Moisture Sensitivity Level: MSL 1 (Unlimited) ensures compatibility with standard handling and storage
• Physical Dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm) ensures mechanical fit

Substitutes are grouped by tolerance and power rating improvements while maintaining the core electrical and mechanical specifications. Tolerance can be equal or tighter (lower value). Power rating can be equal or higher. Temperature coefficient and operating temperature range may vary based on manufacturer specifications.

Parameter Comparison

Engineering Selection Recommendations

Direct Replacement (Same Tolerance & Power): RT0805FRE076R2L maintains identical electrical specifications (6.2 Ohms ±1%, 0.1W) with improved product status (Active), extended operating temperature range (-55°C ~ 155°C), and ROHS3 compliance. This is the primary equivalent for direct substitution.

Enhanced Tolerance (Tighter Tolerance): RT0805DRE076R2L provides ±0.5% tolerance with increased power rating (0.125W), Active status, and ROHS3 compliance. Suitable for applications requiring improved tolerance performance.

Precision Grade (Highest Tolerance): CPF0805B6R2E1 (TE Connectivity) and RNCF0805BTC6R20 (Stackpole) both offer ±0.1% tolerance. CPF0805B6R2E1 maintains 0.1W power rating with improved temperature coefficient (±25ppm/°C) but is RoHS non-compliant. RNCF0805BTC6R20 provides 0.25W power rating with AEC-Q200 automotive qualification and ROHS3 compliance.

Higher Power Rating: RNCF0805BTC6R20 and RNCF0805DTC6R20 (Stackpole) both offer 0.25W power rating with AEC-Q200 automotive qualification and ROHS3 compliance, providing design margin for thermal performance.

Compliance Considerations: All substitute parts except CPF0805B6R2E1 are ROHS3 compliant. RNCF series components carry AEC-Q200 automotive qualification. Selection should align with application compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can RT0805FRE076R2L directly replace RJ0805FRE076R2L? A: Yes. Both parts are 6.2 Ohms ±1% thin film resistors in 0805 package. RT0805FRE076R2L is the active equivalent with identical electrical specifications, improved product status, extended temperature range, and ROHS3 compliance.

Q: What is the difference between tolerance ratings ±1%, ±0.5%, and ±0.1%? A: Tolerance indicates the maximum deviation from the nominal resistance value. ±1% allows ±0.062 Ohms deviation from 6.2 Ohms. ±0.5% allows ±0.031 Ohms deviation. ±0.1% allows ±0.0062 Ohms deviation. Tighter tolerance provides more precise resistance values for precision applications.

Q: Are all substitute parts mechanically compatible with the original footprint? A: Yes. All substitute parts are 0805 (2012 Metric) package with identical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm), ensuring PCB footprint compatibility. Height variations (0.024" to 0.026") are within standard assembly tolerances.

Q: What does AEC-Q200 qualification mean? A: AEC-Q200 is an automotive qualification standard for passive components. RNCF series resistors meeting this standard are suitable for automotive applications requiring enhanced reliability and quality assurance.

Q: Can I use a higher power-rated resistor as a substitute? A: Yes. Using a higher power-rated resistor (0.125W or 0.25W instead of 0.1W) is electrically compatible and provides additional thermal margin. Physical dimensions remain identical, ensuring mechanical compatibility.

Q: What is the significance of RoHS compliance? A: ROHS3 compliance indicates the component meets Restriction of Hazardous Substances regulations, restricting lead and other hazardous materials. Most substitute parts are ROHS3 compliant except CPF0805B6R2E1, which should be verified against application requirements.

Q: How does temperature coefficient affect component selection? A: Temperature coefficient (ppm/°C) indicates resistance change per degree Celsius. Lower values indicate better stability across temperature ranges. CPF0805B6R2E1 offers ±25ppm/°C (superior stability), while others are ±50ppm/°C. Selection depends on application temperature sensitivity requirements.