RJ0805FRE075R6L Equivalent & Substitute Parts

Part Overview

The RJ0805FRE075R6L is a 5.6 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO, this component is classified as obsolete. Due to its obsolete status, equivalent and substitute parts with active product status are necessary for new designs and ongoing production requirements.

Substiute Parts

RJ0805FRE075R6L
YAGEOIn Stock: 718RJ0805FRE075R6L Datasheet
RJ0805FRE075R6L
Current Part
RT0805DRE075R6L
YAGEOIn Stock: 808RT0805DRE075R6L Datasheet
RT0805DRE075R6L
Upgrade
RT0805FRE075R6L
YAGEOIn Stock: 769RT0805FRE075R6L Datasheet
RT0805FRE075R6L
Upgrade
CPF0805B5R6E1
TE Connectivity Passive ProductIn Stock: 1550CPF0805B5R6E1 Datasheet
CPF0805B5R6E1
Upgrade
RNCF0805BTC5R60
Stackpole Electronics IncIn Stock: 744RNCF0805BTC5R60 Datasheet
RNCF0805BTC5R60
MFR Recommended
RNCF0805DTC5R60
Stackpole Electronics IncIn Stock: 1241RNCF0805DTC5R60 Datasheet
RNCF0805DTC5R60
MFR Recommended

Key Parameters

Parameter Value
Resistance 5.6 Ohms
Tolerance ±1%
Power Rating 0.1W (1/10W)
Package / Case 0805 (2012 Metric)
Composition Thin Film
Temperature Coefficient ±50ppm/°C
Operating Temperature Range -55°C ~ 125°C
Moisture Sensitivity Level 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RJ0805FRE075R6L is determined by the following critical parameters:

  • Resistance Value: All substitutes must be 5.6 Ohms
  • Package / Case: All substitutes must be 0805 (2012 Metric) to ensure PCB footprint compatibility
  • Composition: All substitutes must be thin film resistors to maintain electrical performance characteristics
  • Tolerance: Substitutes with equal or tighter tolerance (±1% or better) are acceptable
  • Power Rating: Substitutes with equal or higher power rating (0.1W or greater) are acceptable
  • Temperature Coefficient: Substitutes with equal or lower temperature coefficient (±50ppm/°C or better) are acceptable
  • Operating Temperature Range: Substitutes must support the minimum operating range of -55°C ~ 125°C
  • Moisture Sensitivity Level: MSL 1 (Unlimited) is maintained across all substitutes

The substitute parts are grouped into three categories based on upgrade characteristics: enhanced tolerance, increased power rating, or both.

Parameter Comparison

Part Number Manufacturer Resistance Tolerance Power (W) Temp Coeff (ppm/°C) Operating Temp (°C) Product Status RoHS Status
RJ0805FRE075R6L YAGEO 5.6 Ω ±1% 0.1 ±50 -55 ~ 125 Obsolete Not Specified
RT0805DRE075R6L YAGEO 5.6 Ω ±0.5% 0.125 ±50 -55 ~ 155 Active ROHS3 Compliant
RT0805FRE075R6L YAGEO 5.6 Ω ±1% 0.125 ±50 -55 ~ 155 Active ROHS3 Compliant
CPF0805B5R6E1 TE Connectivity Passive Product 5.6 Ω ±0.1% 0.1 ±25 -55 ~ 155 Active ROHS3 Compliant
RNCF0805BTC5R60 Stackpole Electronics Inc 5.6 Ω ±0.1% 0.25 ±50 -55 ~ 155 Active ROHS3 Compliant
RNCF0805DTC5R60 Stackpole Electronics Inc 5.6 Ω ±0.5% 0.25 ±50 -55 ~ 155 Active ROHS3 Compliant

Engineering Selection Recommendations

Direct Replacement (Same Tolerance & Power): RT0805FRE075R6L is the direct functional equivalent to RJ0805FRE075R6L. Both are YAGEO thin film 5.6 Ohm ±1% resistors in 0805 package. RT0805FRE075R6L offers increased power rating (0.125W vs 0.1W), extended operating temperature range (-55°C ~ 155°C vs -55°C ~ 125°C), and active product status with ROHS3 compliance.

Enhanced Tolerance Options: RT0805DRE075R6L provides tighter tolerance (±0.5%) with increased power rating and active status. CPF0805B5R6E1 offers the tightest tolerance (±0.1%) with superior temperature coefficient (±25ppm/°C) and active status, though it maintains the original 0.1W power rating.

Automotive-Qualified Options: RNCF0805BTC5R60 and RNCF0805DTC5R60 are Stackpole Electronics resistors with AEC-Q200 automotive qualification. Both feature increased power rating (0.25W), active product status, and ROHS3 compliance. RNCF0805BTC5R60 provides ±0.1% tolerance, while RNCF0805DTC5R60 provides ±0.5% tolerance.

All substitute parts maintain 0805 package compatibility, thin film composition, MSL 1 rating, and support the minimum operating temperature range of -55°C ~ 125°C.

Frequently Asked Questions (FAQ)

Q: Can RT0805FRE075R6L directly replace RJ0805FRE075R6L? A: Yes. Both parts are 5.6 Ohm ±1% thin film resistors in 0805 package. RT0805FRE075R6L is the active equivalent with improved specifications (higher power rating, extended temperature range) and ROHS3 compliance.

Q: What is the difference between the YAGEO RT series substitutes? A: RT0805DRE075R6L offers ±0.5% tolerance with 0.125W power rating. RT0805FRE075R6L offers ±1% tolerance with 0.125W power rating. Both have identical package, resistance value, and temperature coefficient.

Q: Are the Stackpole RNCF parts suitable for non-automotive applications? A: Yes. RNCF0805BTC5R60 and RNCF0805DTC5R60 are AEC-Q200 qualified but function as standard thin film resistors in non-automotive circuits. They provide higher power rating (0.25W) and tighter tolerance options.

Q: Does the CPF0805B5R6E1 have better temperature stability? A: Yes. CPF0805B5R6E1 has a temperature coefficient of ±25ppm/°C compared to ±50ppm/°C for the original part, providing superior temperature stability.

Q: Are all substitute parts ROHS3 compliant? A: All substitute parts listed are ROHS3 compliant. The original RJ0805FRE075R6L does not specify RoHS status.

Q: Can I use a higher power-rated substitute in place of the 0.1W original? A: Yes. Higher power-rated substitutes (0.125W or 0.25W) are electrically compatible and will function in circuits designed for 0.1W resistors. Physical dimensions remain identical in the 0805 package.

Q: What is the operating temperature range limitation? A: The original RJ0805FRE075R6L operates to 125°C. All substitute parts extend this to 155°C, providing additional thermal margin. Circuits limited to 125°C operation are fully compatible with all substitutes.

Request Quote (Ships tomorrow)