RHS5K0 Equivalent & Substitute Parts

Part Overview

The RHS5K0 is a 5k Ohm, 25W wirewound linear potentiometer manufactured by Ohmite, designed for panel mount applications with solder lug termination. This component is currently in active production status. Substitute parts are identified to provide alternatives for procurement flexibility, inventory management, or when the primary part becomes unavailable.

Substiute Parts

RHS5K0

OhmiteIn Stock: 713RHS5K0 Datasheet

Current PartRFQ

RHS5K0E

OhmiteIn Stock: 683RHS5K0E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RHS5K0E is classified as a direct substitute for the RHS5K0 based on electrical and mechanical parameter equivalence. Both parts share identical specifications across all critical substitution criteria:

Key Parameters for Substitution:

• Resistance value: 5k Ohm
• Power rating: 25W
• Taper characteristic: Linear
• Resistive material: Wirewound
• Termination: Solder Lug
• Mounting configuration: Panel Mount
• Physical dimensions: Round body 1.560" diameter
• Actuator specifications: Flatted type, 0.750" length, 0.250" diameter
• Bushing thread: 3/8-32
• Rotation angle: 300°
• Tolerance: ±10%

The primary distinction between these parts is packaging format and compliance certification status.

Parameter Comparison

Engineering Selection Recommendations

Both RHS5K0 and RHS5K0E are active production components from Ohmite with identical electrical and mechanical specifications. Selection between these parts should be based on the following criteria:

RHS5K0: Select this part when RoHS non-compliant components are acceptable for the application and standard packaging is required.

RHS5K0E: Select this part when ROHS3 compliance is mandated by design requirements or regulatory standards. This variant also carries REACH Unaffected certification and is available in bulk packaging for high-volume procurement.

Both parts are functionally interchangeable in applications where the specified electrical parameters (5k Ohm, 25W, linear taper, wirewound) and mechanical dimensions are required.

Frequently Asked Questions (FAQ)

Q: Are RHS5K0 and RHS5K0E electrically identical? A: Yes. Both parts have identical resistance (5k Ohm), power rating (25W), taper (linear), and all electrical specifications. They are direct electrical equivalents.

Q: What is the difference between these two parts? A: The primary differences are RoHS compliance status and packaging format. RHS5K0E is ROHS3 compliant with REACH Unaffected certification, while RHS5K0 is RoHS non-compliant. RHS5K0E is supplied in bulk packaging.

Q: Can I use RHS5K0E as a drop-in replacement for RHS5K0? A: Yes. The parts share identical mechanical dimensions, mounting configuration, actuator specifications, and electrical parameters. Physical installation and electrical connection are identical.

Q: Which part should I specify for new designs? A: Specify RHS5K0E for new designs if RoHS compliance is required by your application standards or regional regulations. Both parts are in active production.

Q: Does packaging format affect component performance? A: No. Packaging format (standard vs. bulk) does not affect electrical or mechanical performance. It only impacts procurement quantity and handling logistics.

Q: Are there any temperature or environmental differences between these parts? A: No temperature coefficient or environmental specifications are provided for either part. Both are rated for the same operational parameters.