RH130C2LBR Equivalent & Substitute Parts

Part Overview

The RH130C2LBR is a rocker switch manufactured by APEM Inc., classified as SPDT (Single Pole Double Throw) with an On-Off-On switch function. This panel-mount, snap-in component is rated for 16A AC at 125V and features a red illuminated concave actuator with neon illumination. The product is currently obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and redesign applications. Substitute parts must maintain electrical performance and mechanical compatibility while meeting current availability and compliance requirements.

Substiute Parts

RH130C2LBR

APEM Inc.In Stock: 873RH130C2LBR Datasheet

Current PartRFQ

RB145E1100

E-SwitchIn Stock: 9869RB145E1100 Datasheet

SimilarRFQ

RB1F45C1100

E-SwitchIn Stock: 965RB1F45C1100 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RH130C2LBR is determined by the following critical parameters:

• Circuit Configuration: Must be SPDT
• Switch Function: Must be On-Off-On
• Current Rating: Minimum 16A AC (equal or greater)
• Voltage Rating: Minimum 125V AC (equal or greater)
• Mounting Type: Must be Panel Mount, Snap-In
• Panel Cutout Dimensions: Must be Rectangular - 30.00mm x 11.00mm
• Termination Style: Must be Quick Connect - 0.250" (6.3mm)
• Electrical Life: Minimum 10,000 Cycles

Two substitute parts meet these core electrical and mechanical requirements. Differences in actuator type, illumination, and operating temperature range do not prevent functional substitution when the primary switching parameters are satisfied.

Parameter Comparison

Engineering Selection Recommendations

RB145E1100 (E-Switch) is the primary substitute for RH130C2LBR. This part maintains identical electrical specifications (16A AC, 125V), mechanical compatibility (panel cutout, termination), and product status (Active). Both parts are ROHS3 compliant and carry equivalent regulatory approvals (cULus for RB145E1100 versus CSA, DEMKO, FEMCO, NEMKO, SEMKO, SEV, UL, VDE for the original). The operating temperature range is reduced from 85°C to 65°C maximum; applications operating above 65°C require thermal evaluation.

RB1F45C1100 (E-Switch) is a secondary substitute with identical mechanical compatibility and voltage rating. The current rating is reduced to 15A AC, making this part suitable only for applications where the load current does not exceed 15A. The operating temperature maximum is also 65°C. This part should be selected only when current requirements are confirmed at 15A or below.

Both E-Switch alternatives are currently in active production with substantial inventory availability, ensuring long-term supply continuity compared to the obsolete APEM part.

Frequently Asked Questions (FAQ)

Q: Can RB145E1100 directly replace RH130C2LBR in all applications?

A: RB145E1100 maintains all critical electrical and mechanical parameters. The primary consideration is the reduced operating temperature maximum (65°C versus 85°C). Applications operating continuously above 65°C require thermal analysis before substitution.

Q: What is the difference between RB145E1100 and RB1F45C1100?

A: Both parts share identical mechanical compatibility and voltage ratings. RB145E1100 is rated for 16A AC, matching the original RH130C2LBR. RB1F45C1100 is rated for 15A AC and features a flat actuator instead of concave. Select RB145E1100 for applications requiring 16A capacity; select RB1F45C1100 only when load current is confirmed at 15A or below.

Q: Are the panel cutout dimensions identical across all three parts?

A: Yes. All three parts require a rectangular panel cutout of 30.00mm x 11.00mm, ensuring mechanical interchangeability in existing panel installations.

Q: Do the substitute parts use the same termination style?

A: Yes. All three parts use Quick Connect - 0.250" (6.3mm) termination, allowing direct wiring compatibility without connector modification.

Q: What compliance certifications apply to the substitute parts?

A: RB145E1100 and RB1F45C1100 carry cULus certification. The original RH130C2LBR carries CSA, DEMKO, FEMCO, NEMKO, SEMKO, SEV, UL, and VDE certifications. Both substitute parts meet North American and European regulatory requirements for panel-mount switches.

Q: Is inventory availability a factor in selecting a substitute?

A: Yes. RH130C2LBR is obsolete with limited remaining stock (787 pcs). RB145E1100 has 9,808 pcs in stock, and RB1F45C1100 has 856 pcs in stock, providing superior long-term supply security.