RGWS80TS65GC13 Equivalent & Substitute Parts

Part Overview

The RGWS80TS65GC13 is an IGBT Trench Field Stop device manufactured by Rohm Semiconductor, rated for 650 V collector-emitter breakdown voltage and 71 A continuous collector current. This through-hole TO-247G package component is designed for high-power switching applications requiring robust thermal performance and reliable gate control characteristics. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when electrical specifications, mechanical packaging, and thermal characteristics remain within the defined parameter envelope, ensuring direct functional replacement without circuit redesign.

Substiute Parts

RGWS80TS65GC13

Rohm SemiconductorIn Stock: 1099RGWS80TS65GC13 Datasheet

Current PartRFQ

RGWS80TS65DGC13

Rohm SemiconductorIn Stock: 1596RGWS80TS65DGC13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of IGBT devices is determined by strict equivalence across electrical performance, thermal ratings, and mechanical compatibility. The RGWS80TS65GC13 establishes a substitution baseline defined by the following critical parameters:

Electrical Equivalence Criteria:

• Collector-emitter breakdown voltage: 650 V (maximum rating)
• Continuous collector current: 71 A (maximum rating)
• Pulsed collector current: 120 A (maximum rating)
• On-state voltage drop: 2 V @ 15V gate voltage, 40A collector current
• Maximum power dissipation: 202 W
• Gate charge: 83 nC
• Switching delay times: 40 ns (on), 114 ns (off) @ 25°C

Mechanical Compatibility Criteria:

• Package type: TO-247-3 (TO-247G supplier designation)
• Mounting configuration: Through Hole
• Pin count and spacing: Fixed by TO-247-3 standard

Regulatory and Environmental Criteria:

• RoHS3 compliance status
• Moisture sensitivity level: 1 (Unlimited)
• Operating temperature range: -40°C to 175°C (junction temperature)

The substitute part RGWS80TS65DGC13 maintains identical electrical specifications, package configuration, and regulatory compliance, establishing full parametric equivalence for direct replacement applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RGWS80TS65GC13 and RGWS80TS65DGC13 are Active products manufactured by Rohm Semiconductor with full RoHS3 compliance and REACH unaffected status. Selection between these parts is based on inventory availability and supply chain considerations rather than electrical or mechanical differentiation.

The RGWS80TS65GC13 maintains 1021 pieces in current stock inventory. The RGWS80TS65DGC13 provides an alternative source with 1533 pieces available, offering enhanced supply continuity for high-volume production requirements or extended lead-time mitigation.

Both devices are qualified for identical application environments across the -40°C to 175°C junction temperature operating range and support equivalent thermal management strategies through the TO-247-3 package configuration. Switching characteristics, gate drive requirements, and power dissipation profiles remain constant across both part numbers, eliminating the need for circuit parameter recalculation or gate driver firmware modification during substitution.

Frequently Asked Questions (FAQ)

Q: Can RGWS80TS65DGC13 replace RGWS80TS65GC13 in existing designs without circuit modification?

A: Yes. Both parts share identical electrical specifications, including voltage rating, current capacity, on-state voltage drop, switching times, and gate charge characteristics. The TO-247-3 package pinout and thermal interface remain unchanged. No circuit redesign or component value adjustment is required.

Q: Are there differences in switching performance between these two part numbers?

A: No. Both devices specify identical switching delay times (40 ns on, 114 ns off @ 25°C), switching energy (700 µJ on, 660 µJ off), and gate charge (83 nC). Gate driver timing and PWM frequency settings remain valid across both parts.

Q: What is the significance of the different part number suffix (GC13 versus DGC13)?

A: The suffix variation reflects internal manufacturing process or die revision within Rohm Semiconductor's product line. Both suffixes deliver identical electrical performance and are qualified to the same specification envelope. The difference does not affect functional compatibility or application performance.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both RGWS80TS65GC13 and RGWS80TS65DGC13 operate across the full -40°C to 175°C junction temperature range. Thermal management design and heat sink sizing calculations remain identical for both parts.

Q: Do these parts require different gate drive circuits?

A: No. Gate charge (83 nC), input type (Standard), and switching delay characteristics are identical. Existing gate driver designs, including resistor values, capacitor sizing, and timing parameters, transfer directly between parts without modification.

Q: What is the moisture sensitivity rating for these components?

A: Both parts carry MSL 1 (Unlimited) classification, indicating no moisture-related storage or handling restrictions. Standard PCB assembly processes and storage conditions apply without special precautions.

Q: Are both parts RoHS compliant?

A: Yes. Both RGWS80TS65GC13 and RGWS80TS65DGC13 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for commercial and industrial applications.