RGWS60TS65GC13 Equivalent & Substitute Parts

Part Overview

The RGWS60TS65GC13 is an IGBT Trench Field Stop device manufactured by Rohm Semiconductor, rated for 650 V collector-emitter breakdown voltage and 51 A maximum collector current. This through-hole TO-247G packaged component is designed for high-power switching applications requiring robust thermal performance and reliable gate control characteristics. The device is currently in active production status with 736 pieces available in new original inventory. Substitute parts are identified when electrical specifications, mechanical packaging, and thermal ratings remain equivalent, enabling direct replacement in circuit designs without performance degradation.

Substiute Parts

RGWS60TS65GC13

Rohm SemiconductorIn Stock: 757RGWS60TS65GC13 Datasheet

Current PartRFQ

RGWS60TS65DGC13

Rohm SemiconductorIn Stock: 1495RGWS60TS65DGC13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RGWS60TS65GC13 are identified based on strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Voltage - Collector Emitter Breakdown (Max): 650 V
• Current - Collector (Ic) (Max): 51 A
• Current - Collector Pulsed (Icm): 90 A
• Vce(on) (Max) @ Vge, Ic: 2V @ 15V, 30A
• Power - Max: 156 W
• Switching Energy: 500µJ (on), 450µJ (off)
• Gate Charge: 58 nC
• Td (on/off) @ 25°C: 32ns/91ns

Mechanical & Thermal Equivalence Criteria:

• Package / Case: TO-247-3
• Mounting Type: Through Hole
• Operating Temperature Range: -40°C to 175°C (TJ)

Compliance & Regulatory Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

The RGWS60TS65DGC13 meets all equivalence criteria and is classified as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the RGWS60TS65GC13 and RGWS60TS65DGC13 are active production devices manufactured by Rohm Semiconductor with identical electrical, mechanical, and thermal specifications. Selection between these parts is based on inventory availability and supply chain considerations.

RGWS60TS65GC13 is suitable for applications where the primary part number is specified in design documentation or where existing inventory stock of 736 pieces meets project requirements.

RGWS60TS65DGC13 is suitable for applications requiring higher inventory availability, with 1417 pieces currently in stock. This substitute part provides equivalent performance and meets all regulatory compliance requirements including ROHS3 and REACH standards.

Both devices are rated for identical operating conditions: 650 V collector-emitter breakdown voltage, 51 A maximum collector current, 156 W maximum power dissipation, and -40°C to 175°C junction temperature range. The TO-247-3 through-hole package enables direct mechanical and electrical substitution without circuit board redesign.

Frequently Asked Questions (FAQ)

Q: Can RGWS60TS65DGC13 be used as a direct replacement for RGWS60TS65GC13?

A: Yes. The RGWS60TS65DGC13 is a parametric equivalent substitute with identical electrical ratings, switching characteristics, thermal specifications, and package configuration. Direct substitution is supported without circuit modification.

Q: Are the switching energy and gate charge characteristics identical between these parts?

A: Yes. Both parts specify 500 µJ on-switching energy, 450 µJ off-switching energy, and 58 nC gate charge. Switching delay times are also identical at 32 ns (on) and 91 ns (off) at 25°C.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both RGWS60TS65GC13 and RGWS60TS65DGC13 are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. No compliance differences exist between the two parts.

Q: Is the TO-247-3 package identical for both parts?

A: Yes. Both parts use the TO-247-3 through-hole package with identical mechanical dimensions, pin configuration, and thermal interface characteristics. PCB footprints and heatsink mounting are interchangeable.

Q: What is the maximum junction temperature for both devices?

A: Both parts operate across an identical temperature range of -40°C to 175°C junction temperature (TJ). Thermal performance and derating curves are equivalent.

Q: Are there any differences in maximum collector current or voltage ratings?

A: No. Both parts are rated for 650 V maximum collector-emitter breakdown voltage and 51 A maximum collector current, with 90 A pulsed collector current capability.

Q: Which part should be selected based on availability?

A: Selection is based on supply chain requirements. RGWS60TS65DGC13 has higher current inventory (1417 pieces) compared to RGWS60TS65GC13 (736 pieces). Both are active production devices with equivalent lead times and support.