RGTH00TS65DGC13 Equivalent & Substitute Parts

Part Overview

The RGTH00TS65DGC13 is a Trench Field Stop IGBT manufactured by Rohm Semiconductor, rated for 650 V collector-emitter breakdown voltage and 85 A continuous collector current. This through-hole device in TO-247G packaging is designed for high-power switching applications requiring robust thermal performance and reliable gate control characteristics.

The RGTH00TS65DGC13 maintains Active product status with full design support. Substitute parts become necessary when TO-247G packaging availability is constrained, when alternative supplier device packages are preferred for specific manufacturing processes, or when inventory requirements necessitate selection from available stock alternatives that maintain identical electrical performance specifications.

Substiute Parts

RGTH00TS65DGC13

Rohm SemiconductorIn Stock: 1649RGTH00TS65DGC13 Datasheet

Current PartRFQ

RGTH00TS65GC11

Rohm SemiconductorIn Stock: 2244RGTH00TS65GC11 Datasheet

Parametric EquivalentRFQ

RGTH00TS65GC13

Rohm SemiconductorIn Stock: 1824RGTH00TS65GC13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RGTH00TS65DGC13 is determined by strict equivalence across the following critical parameters:

Electrical Performance Criteria:

• Voltage - Collector Emitter Breakdown (Max): 650 V
• Current - Collector (Ic) (Max): 85 A
• Current - Collector Pulsed (Icm): 200 A
• Vce(on) (Max) @ Vge, Ic: 2.1 V @ 15 V, 50 A
• Power - Max: 277 W
• Gate Charge: 94 nC
• Td (on/off) @ 25°C: 39 ns / 143 ns
• Operating Temperature Range: -40°C to 175°C (TJ)

Mechanical & Environmental Criteria:

• IGBT Type: Trench Field Stop
• Mounting Type: Through Hole
• Package / Case: TO-247-3
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts RGTH00TS65GC13 and RGTH00TS65GC11 maintain complete electrical equivalence to the main part. Substitution differences are limited to supplier device package designations (TO-247G, TO-247, TO-247N) and product status classifications, which do not affect functional performance or thermal characteristics in applications where the TO-247-3 case outline is specified.

Parameter Comparison

Engineering Selection Recommendations

RGTH00TS65GC13 (Primary Substitute)

The RGTH00TS65GC13 is electrically and mechanically identical to the RGTH00TS65DGC13 with Active product status maintained by Rohm Semiconductor. This part is suitable for new designs and ongoing production. The only distinction is the supplier device package designation (TO-247 versus TO-247G), which does not affect PCB layout, thermal interface, or electrical performance. Current inventory of 1,744 pieces supports production requirements.

RGTH00TS65GC11 (Secondary Substitute)

The RGTH00TS65GC11 provides complete electrical equivalence and identical thermal characteristics. However, this part carries a "Not For New Designs" product status classification. Selection of this part is appropriate only for legacy system maintenance, field replacements in existing installations, or applications where design freeze conditions permit use of non-active components. The TO-247N supplier device package maintains mechanical compatibility with TO-247-3 case outline specifications. Current inventory of 2,200 pieces is available.

Both substitute parts maintain ROHS3 compliance, unlimited moisture sensitivity rating, and identical operating temperature ranges. Selection between substitutes should prioritize RGTH00TS65GC13 for new designs and RGTH00TS65GC11 only when legacy compatibility or specific inventory constraints apply.

Frequently Asked Questions (FAQ)

Q: Can RGTH00TS65GC13 and RGTH00TS65GC11 be used interchangeably with RGTH00TS65DGC13 in existing designs?

A: Yes. Both substitute parts maintain identical electrical specifications, thermal ratings, and TO-247-3 case outline dimensions. PCB layouts, gate drive circuits, and thermal management designs require no modification. The supplier device package designations (TO-247G, TO-247, TO-247N) refer to internal Rohm classification and do not affect form factor or pin configuration.

Q: What is the difference between TO-247G, TO-247, and TO-247N package designations?

A: These designations represent Rohm Semiconductor's internal supplier device package classifications for the same TO-247-3 case outline. All three variants share identical external dimensions, pin spacing, and mounting characteristics. The designations do not indicate different physical packages or performance variations.

Q: Why is RGTH00TS65GC11 marked "Not For New Designs"?

A: This classification indicates that Rohm Semiconductor has transitioned this part number to legacy status. While the part remains fully functional and compliant with all specifications, new product development should prioritize RGTH00TS65GC13 or RGTH00TS65DGC13 to ensure long-term availability and design continuity. RGTH00TS65GC11 remains suitable for field replacements and maintenance of existing systems.

Q: Are there any thermal or electrical performance differences between the three part numbers?

A: No. All three parts share identical maximum power dissipation (277 W), operating temperature range (-40°C to 175°C TJ), gate charge (94 nC), and switching characteristics (Td on/off: 39 ns / 143 ns). Thermal interface requirements and heat sink calculations remain unchanged across all three variants.

Q: What compliance certifications apply to all three substitute parts?

A: All three parts maintain ROHS3 compliance, unlimited moisture sensitivity level (MSL 1), REACH unaffected status, and identical ECCN and HTSUS classifications. No additional compliance verification is required when substituting between these part numbers.

Q: Can RGTH00TS65GC11 be used in new production if inventory of RGTH00TS65DGC13 and RGTH00TS65GC13 is exhausted?

A: Electrical and thermal equivalence permits functional substitution. However, design documentation and bill of materials should reflect the actual part number used. The "Not For New Designs" status is a manufacturer recommendation rather than a technical restriction. Production decisions should align with organizational design control policies and long-term supply chain strategy.