RGL1J Equivalent & Substitute Parts

Part Overview

The RGL1J is a general-purpose rectifier diode manufactured by Diotec Semiconductor, rated for 600 V DC reverse voltage and 1 A average rectified current. The device is packaged in DO-213AA (MINI-MELF) surface mount configuration and features fast recovery characteristics with a reverse recovery time of 250 ns. The RGL1J is classified as Active product status and is supplied in Cut Tape (CT) & Digi-Reel® packaging format. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across alternative packaging configurations or compliance certifications, enabling design flexibility and supply chain optimization.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	600	V
Current - Average Rectified (Io)	1	A
Voltage - Forward (Vf) (Max) @ If	1.3 @ 1	V @ A
Reverse Recovery Time (trr)	250	ns
Current - Reverse Leakage @ Vr	5 @ 600	µA @ V
Speed Classification	Fast Recovery ≤ 500ns, > 200mA (Io)	-
Package / Case	DO-213AA, MINI-MELF	-
Mounting Type	Surface Mount	-
Operating Temperature - Junction	-50 to 175	°C

Substitute Part Grouping Explanation

Substitute parts for the RGL1J are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are defined by the following parameters:

Voltage - DC Reverse (Vr) (Max): 600 V
Current - Average Rectified (Io): 1 A
Voltage - Forward (Vf) (Max) @ If: 1.3 V @ 1 A
Reverse Recovery Time (trr): 250 ns
Current - Reverse Leakage @ Vr: 5 µA @ 600 V
Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)
Package / Case: DO-213AA, MINI-MELF
Mounting Type: Surface Mount
Operating Temperature - Junction: -50°C to 175°C

The RGL1JR13 is classified as a parametric equivalent substitute. This part maintains identical electrical specifications and package configuration while differing in packaging format (Tape & Reel versus Cut Tape & Digi-Reel) and compliance certifications.

Parameter Comparison

Parameter	RGL1J	RGL1JR13	Match
Manufacturer	Diotec Semiconductor	Diotec Semiconductor	Yes
Category	Diodes, Rectifiers	Diodes, Rectifiers	Yes
Description	DIODE GEN PURP 600V 1A DO213AA	DIODE GEN PURP 600V 1A DO213AA	Yes
Voltage - DC Reverse (Vr) (Max)	600 V	600 V	Yes
Current - Average Rectified (Io)	1 A	1 A	Yes
Voltage - Forward (Vf) (Max) @ If	1.3 V @ 1 A	1.3 V @ 1 A	Yes
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Yes
Reverse Recovery Time (trr)	250 ns	250 ns	Yes
Current - Reverse Leakage @ Vr	5 µA @ 600 V	5 µA @ 600 V	Yes
Package / Case	DO-213AA, MINI-MELF	DO-213AA, MINI-MELF	Yes
Mounting Type	Surface Mount	Surface Mount	Yes
Operating Temperature - Junction	-50°C to 175°C	-50°C to 175°C	Yes
Product Status	Active	Active	Yes
Packaging Format	Cut Tape (CT) & Digi-Reel®	Tape & Reel (TR)	Different
RoHS Status	Not applicable	ROHS3 Compliant	Different

Engineering Selection Recommendations

The RGL1J and RGL1JR13 are electrically and mechanically equivalent general-purpose rectifier diodes. Both parts maintain identical electrical performance across all critical parameters including reverse voltage rating, forward current capacity, forward voltage drop, and reverse recovery characteristics. Both devices are classified as Active product status from Diotec Semiconductor.

The primary distinction between these parts is packaging format. The RGL1J is supplied in Cut Tape (CT) & Digi-Reel® format, while the RGL1JR13 is supplied in Tape & Reel (TR) format. Selection between these formats depends on assembly process requirements and component handling procedures.

The RGL1JR13 carries ROHS3 compliance certification, whereas the RGL1J is marked as Not applicable for RoHS status. For applications requiring RoHS compliance documentation, the RGL1JR13 is the appropriate selection. Both parts are suitable for applications requiring fast recovery rectification in the 600 V, 1 A operating range with junction temperature operation from -50°C to 175°C.

Frequently Asked Questions (FAQ)

Q: Are RGL1J and RGL1JR13 electrically interchangeable?

A: Yes. Both parts are rated for 600 V DC reverse voltage, 1 A average rectified current, 1.3 V forward voltage drop at 1 A, and 250 ns reverse recovery time. Electrical performance is identical across all specified parameters.

Q: What is the difference between Cut Tape (CT) & Digi-Reel® and Tape & Reel (TR) packaging?

A: Cut Tape (CT) & Digi-Reel® format supplies components on tape that is cut into sections and wound on reels for manual or semi-automated assembly processes. Tape & Reel (TR) format supplies components on continuous tape wound on full reels for automated pick-and-place assembly equipment. Selection depends on assembly line capabilities and component handling requirements.

Q: Does RoHS compliance affect component performance?

A: No. RoHS compliance is a regulatory and material composition requirement, not a performance specification. The RGL1JR13 carries ROHS3 certification, indicating compliance with Restriction of Hazardous Substances directives. The RGL1J is marked as Not applicable for RoHS status. Both parts deliver identical electrical and thermal performance.

Q: Can RGL1J be replaced with RGL1JR13 in existing designs?

A: Yes, provided the assembly process accommodates Tape & Reel (TR) packaging format. All electrical specifications, thermal ratings, and mechanical package dimensions are identical. Verify that production equipment supports the TR packaging format before implementation.

Q: What is the operating temperature range for both parts?

A: Both RGL1J and RGL1JR13 are rated for junction temperature operation from -50°C to 175°C. This range applies to both parts identically.

Q: Are there inventory differences between RGL1J and RGL1JR13?

A: Yes. RGL1J inventory is listed as 3,800 pieces. RGL1JR13 inventory is listed as 410,609 pieces. Availability may influence part selection for high-volume production requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message