RGC1/10C2322DTP Equivalent & Substitute Parts

Part Overview

The RGC1/10C2322DTP is a 23.2 kOhm chip resistor manufactured by Kamaya Inc., specified at 0.1% tolerance in 0805 package format. This component is classified as Active product status with unlimited moisture sensitivity rating (MSL 1). The part is supplied in Tape & Reel packaging and maintains full REACH compliance with EAR99 export classification. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the 0805 form factor and related tolerance parameters.

Substiute Parts

RGC1/10C2322DTP

Kamaya Inc.In Stock: 1153RGC1/10C2322DTP Datasheet

Current PartRFQ

RGC0805DTC23K2

Stackpole Electronics IncIn Stock: 1295RGC0805DTC23K2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RGC1/10C2322DTP is determined by the following critical parameters:

Primary Substitution Criteria:

• Resistance value: 23.2 kOhm (exact match required)
• Package format: 0805 (2012 Metric) mechanical compatibility
• Moisture sensitivity: MSL 1 or equivalent unlimited rating
• Regulatory compliance: REACH Unaffected and EAR99 classification
• Product status: Active availability

Secondary Compatibility Factors:

• Tolerance specification: Parts with tolerance ≤0.5% are compatible with 0.1% requirement
• Packaging: Tape & Reel format maintains supply chain compatibility
• Termination count: 2-terminal configuration (standard for chip resistors)

The substitute part RGC0805DTC23K2 meets all primary criteria with identical resistance value, package format, MSL rating, and regulatory compliance. The tolerance specification of ±0.5% is broader than the main part's 0.1%, making it functionally compatible for applications where the tighter tolerance is not a design requirement.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (RGC1/10C2322DTP): Select the main part when circuit design specifications explicitly require 0.1% tolerance. This tighter tolerance specification is appropriate for precision measurement circuits, calibration references, or applications with strict component matching requirements. Active product status and unlimited MSL rating ensure consistent supply availability and simplified assembly handling.

Substitute Part Selection (RGC0805DTC23K2): The RGC0805DTC23K2 substitute is suitable for applications where 0.1% tolerance is not a design requirement and ±0.5% tolerance is acceptable. Both parts maintain identical regulatory compliance (REACH Unaffected, EAR99), MSL 1 rating, and 0805 package compatibility. The substitute part provides equivalent mechanical fit and supply chain reliability through Stackpole Electronics Inc. manufacturing.

Compliance Considerations: Both parts are Active status products with REACH Unaffected designation and EAR99 export classification. MSL 1 rating eliminates moisture-related assembly constraints for both options. Selection between main and substitute parts should be based solely on tolerance specification requirements and design circuit performance criteria.

Frequently Asked Questions (FAQ)

Q: Can RGC0805DTC23K2 be used as a direct replacement for RGC1/10C2322DTP?

A: RGC0805DTC23K2 is mechanically and electrically compatible in 0805 package applications. The primary difference is tolerance specification: 0.1% (main part) versus ±0.5% (substitute). Direct replacement is valid when circuit design tolerates ±0.5% resistance variation. Verify tolerance requirements in your specific application schematic before substitution.

Q: What is the significance of MSL 1 rating for both parts?

A: MSL 1 (Unlimited) indicates no moisture sensitivity restrictions. Both parts do not require special moisture-controlled storage, desiccant packaging, or bake-out procedures prior to assembly. This simplifies inventory management and reduces handling complexity compared to higher MSL-rated components.

Q: Are both parts suitable for high-temperature applications?

A: The substitute part RGC0805DTC23K2 specifies operating temperature range of -55°C to 155°C. The main part RGC1/10C2322DTP does not provide temperature range specification in available documentation. For applications requiring confirmed high-temperature performance, verify temperature specifications with manufacturer datasheets.

Q: Do both parts meet export compliance requirements?

A: Both RGC1/10C2322DTP and RGC0805DTC23K2 carry EAR99 classification and REACH Unaffected status. These designations indicate standard export eligibility without additional licensing requirements. Compliance status is identical between main and substitute parts.

Q: What is the mechanical compatibility between these 0805 package parts?

A: Both parts conform to 0805 (2012 Metric) package standard with identical footprint dimensions. The substitute part specifies 0.079" L x 0.049" W (2.00mm x 1.25mm) with 0.024" (0.60mm) maximum seated height. This dimensional compatibility ensures PCB layout and assembly process compatibility without design modification.

Q: How do tolerance specifications affect circuit performance?

A: The 0.1% tolerance of RGC1/10C2322DTP provides tighter component matching for precision applications. The ±0.5% tolerance of RGC0805DTC23K2 introduces wider resistance variation. Selection depends on circuit sensitivity to component tolerance stack-up and design margin requirements. Consult circuit analysis documentation to determine acceptable tolerance limits.