RGC0805FTC76K8 Equivalent & Substitute Parts

Part Overview

The RGC0805FTC76K8 is a 76.8 kOhms ±1% thick film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. Manufactured by Stackpole Electronics Inc, this component is Active status and ROHS3 compliant. Substitute parts are identified to provide alternatives with enhanced electrical specifications or improved availability while maintaining core functional compatibility within the 0805 package form factor.

Substiute Parts

RGC0805FTC76K8

Stackpole Electronics IncIn Stock: 835RGC0805FTC76K8 Datasheet

Current PartRFQ

ERJ-PB6B7682V

Panasonic Electronic ComponentsIn Stock: 4886ERJ-PB6B7682V Datasheet

UpgradeRFQ

ERJ-PB6D7682V

Panasonic Electronic ComponentsIn Stock: 5402ERJ-PB6D7682V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RGC0805FTC76K8 are qualified based on the following criteria:

• Identical resistance value: 76.8 kOhms
• Identical package: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS compliance: ROHS3 Compliant
• Identical MSL rating: 1 (Unlimited)

Substitute parts may feature improved tolerance specifications (±0.1% or ±0.5% versus ±1%) and higher power ratings (0.25W versus 0.125W). These enhancements provide design flexibility for applications requiring tighter tolerance control or higher power dissipation capability while maintaining full mechanical and thermal compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and full ROHS3 compliance. The RGC0805FTC76K8 serves as the baseline specification. The Panasonic ERJ-PB6B7682V and ERJ-PB6D7682V substitutes provide identical mechanical fit and thermal performance while offering enhanced electrical specifications. Both Panasonic alternatives carry AEC-Q200 automotive qualification, which may be required for automotive or high-reliability applications. Selection between substitute parts depends on tolerance requirements: ERJ-PB6B7682V for ±0.1% tolerance applications, or ERJ-PB6D7682V for ±0.5% tolerance applications. All parts are suitable for direct PCB footprint replacement without design modification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B7682V or ERJ-PB6D7682V be used as direct replacements for RGC0805FTC76K8?

A: Yes. All three parts share identical resistance value, package form factor (0805), composition (thick film), temperature coefficient, operating temperature range, and RoHS compliance status. Mechanical and thermal compatibility is guaranteed. The substitute parts offer improved tolerance specifications and higher power ratings as design enhancements.

Q: What is the difference between ERJ-PB6B7682V and ERJ-PB6D7682V?

A: Both parts are Panasonic 0805 package resistors with 76.8 kOhms resistance and 0.25W power rating. The primary difference is tolerance: ERJ-PB6B7682V provides ±0.1% tolerance, while ERJ-PB6D7682V provides ±0.5% tolerance. Both carry AEC-Q200 automotive qualification.

Q: Are there any height or dimensional differences between these parts?

A: The RGC0805FTC76K8 has a maximum seated height of 0.024" (0.60mm). The Panasonic substitutes (ERJ-PB6B7682V and ERJ-PB6D7682V) have a maximum seated height of 0.028" (0.70mm). Both dimensions are within standard 0805 package tolerances and compatible with typical PCB assembly processes.

Q: Do the substitute parts require different soldering or handling procedures?

A: No. All parts share identical MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard SMD assembly and soldering procedures applicable to 0805 resistors apply uniformly across all three parts.

Q: Which part should be selected for automotive applications?

A: For automotive applications, either ERJ-PB6B7682V or ERJ-PB6D7682V is appropriate, as both carry AEC-Q200 qualification. The RGC0805FTC76K8 does not specify AEC-Q200 rating.