RGC0603FTC82K0 Equivalent & Substitute Parts

Part Overview

The RGC0603FTC82K0 is an 82 kOhms ±1% 0.1W chip resistor in 0603 (1608 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor meets automotive AEC-Q200 qualification and operates across -55°C to 155°C. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when original stock is unavailable or when design requirements permit equivalent electrical and mechanical specifications.

Substiute Parts

RGC0603FTC82K0

Stackpole Electronics IncIn Stock: 1122RGC0603FTC82K0 Datasheet

Current PartRFQ

RE0603FRE0782KL

YAGEOIn Stock: 10113RE0603FRE0782KL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RGC0603FTC82K0 is determined by strict equivalence across the following parameters:

• Resistance value: 82 kOhms
• Tolerance: ±1%
• Power rating: 0.1W
• Package type: 0603 (1608 Metric)
• Composition: Thick Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Termination count: 2
• RoHS compliance: ROHS3 Compliant
• MSL rating: 1 (Unlimited)

The RE0603FRE0782KL from YAGEO meets all these criteria and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The RE0603FRE0782KL from YAGEO is electrically and mechanically equivalent to the RGC0603FTC82K0. Both parts maintain identical resistance, tolerance, power rating, and thermal characteristics. Both achieve ROHS3 compliance and carry MSL 1 rating. The primary distinction is manufacturer: Stackpole Electronics Inc for the RGC series versus YAGEO for the RE series. Selection between these parts depends on supply availability, procurement lead times, and established supplier relationships. No electrical performance difference exists between the two options when applied within specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can RE0603FRE0782KL replace RGC0603FTC82K0 in automotive applications?

A: Yes. Both parts meet the same electrical specifications (82 kOhms ±1%, 0.1W, ±50ppm/°C) and operate across identical temperature ranges (-55°C to 155°C). Both are ROHS3 compliant with MSL 1 rating. The RE0603FRE0782KL is a direct substitute for automotive circuit designs.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 0603 (1608 Metric) package with identical length (0.063" / 1.60mm), width (0.031" / 0.80mm), and maximum seated height (0.022" / 0.55mm). PCB footprints and assembly processes remain unchanged.

Q: What is the difference between RGC and RE series resistors?

A: RGC is the Stackpole Electronics Inc series designation, while RE is the YAGEO series designation. For the 82 kOhms ±1% 0.1W 0603 specification, both series provide identical electrical performance and thermal characteristics.

Q: Are there any compatibility concerns with tape and reel packaging?

A: No. Both parts are supplied in Tape & Reel (TR) packaging format, maintaining compatibility with standard SMD assembly equipment and processes.

Q: What certifications apply to both parts?

A: Both parts are ROHS3 compliant, carry REACH Unaffected status, and are classified under ECCN EAR99 with HTSUS code 8533.21.0030. MSL rating is 1 (Unlimited) for both.