RGC0603FTC100R Equivalent & Substitute Parts

Part Overview

The RGC0603FTC100R is a 100 Ohm ±1% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Stackpole Electronics Inc. This component is rated for automotive applications under AEC-Q200 standard and operates across -55°C to 155°C. The part is currently active in production with 807 units in stock. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or performance upgrades within the same electrical and mechanical specifications.

Substiute Parts

RGC0603FTC100R

Stackpole Electronics IncIn Stock: 891RGC0603FTC100R Datasheet

Current PartRFQ

RGC0603DTC100R

Stackpole Electronics IncIn Stock: 869RGC0603DTC100R Datasheet

UpgradeRFQ

CRCW0603100RFHEAP

Vishay DaleIn Stock: 5879CRCW0603100RFHEAP Datasheet

DirectRFQ

RK73G1JTTD1000F

KOA Speer Electronics, Inc.In Stock: 25417RK73G1JTTD1000F Datasheet

DirectRFQ

RE0603FRE07100RL

YAGEOIn Stock: 7697RE0603FRE07100RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by matching the following critical parameters: resistance value (100 Ohms), package type (0603), power rating (0.1W), composition (thick film), operating temperature range (-55°C to 155°C), and compliance certifications (RoHS3, REACH Unaffected). Tolerance variations (±1% to ±0.5%) are permitted as tighter tolerances represent performance upgrades. Automotive AEC-Q200 rating is maintained across all direct substitutes. All substitute parts maintain identical electrical performance within the specified operating conditions and are pin-compatible with identical termination count (2).

Parameter Comparison

Engineering Selection Recommendations

RGC0603DTC100R represents an upgrade option within the same manufacturer series, offering improved tolerance (±0.5% vs ±1%) while maintaining all other electrical and mechanical specifications. This part is suitable for applications requiring tighter resistance accuracy.

CRCW0603100RFHEAP (Vishay Dale) and RK73G1JTTD1000F (KOA Speer Electronics) are direct functional equivalents with identical electrical parameters and AEC-Q200 automotive certification. Both maintain full compatibility with the original part specification.

RE0603FRE07100RL (YAGEO) is electrically equivalent but lacks explicit AEC-Q200 automotive rating. This part is suitable for non-automotive applications or where automotive certification is not required.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and identical package dimensions, ensuring direct PCB compatibility without design modification.

Frequently Asked Questions (FAQ)

Q: Can RGC0603DTC100R replace RGC0603FTC100R in automotive applications? A: Yes. RGC0603DTC100R is a direct substitute with improved tolerance (±0.5%) and maintains AEC-Q200 certification, identical package, power rating, and operating temperature range.

Q: Are CRCW0603100RFHEAP and RK73G1JTTD1000F interchangeable with the original part? A: Yes. Both parts match all critical parameters: 100 Ohm resistance, ±1% tolerance, 0.1W power rating, 0603 package, AEC-Q200 rating, and -55°C to 155°C operating range. Physical dimensions are compatible with standard 0603 PCB footprints.

Q: What is the difference between parts with and without AEC-Q200 rating? A: AEC-Q200 certification indicates automotive-grade qualification including reliability testing and failure rate analysis. Parts without this rating are suitable for general industrial or consumer applications but should not be used in automotive designs requiring this certification.

Q: Can RE0603FRE07100RL be used in automotive applications? A: RE0603FRE07100RL lacks explicit AEC-Q200 automotive certification. Use this part only in non-automotive applications or where automotive qualification is not a design requirement.

Q: Are all substitute parts available in the same packaging format? A: Yes. All listed parts are supplied in Tape & Reel (TR) packaging, standard for automated assembly processes.

Q: Do tolerance differences affect circuit performance? A: Tolerance differences (±1% vs ±0.5%) affect resistance accuracy. Tighter tolerance parts (±0.5%) provide better precision for applications sensitive to resistance variation. Standard tolerance (±1%) is acceptable for most general-purpose circuits.