RGC0402FTC100R Equivalent & Substitute Parts

Part Overview

The RGC0402FTC100R is a 100 Ohm ±1% thick film chip resistor in 0402 (1005 Metric) package manufactured by Stackpole Electronics Inc. This component is rated for automotive applications under AEC-Q200 standard with a power rating of 0.063W (1/16W) and operates across -55°C to 155°C. The part is currently in active production status. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements.

Substiute Parts

RGC0402FTC100R

Stackpole Electronics IncIn Stock: 727RGC0402FTC100R Datasheet

Current PartRFQ

RE0402FRE07100RL

YAGEOIn Stock: 50011RE0402FRE07100RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RGC0402FTC100R is determined by strict alignment of the following parameters:

Resistance value and tolerance must match exactly at 100 Ohms ±1%. Power rating must be equivalent at 0.063W (1/16W). Package designation must be identical: 0402 (1005 Metric). Composition type must be thick film. Temperature coefficient must be ±50ppm/°C. Operating temperature range must span -55°C to 155°C minimum. RoHS3 compliance and MSL 1 rating are required. The substitute part RE0402FRE07100RL from YAGEO meets all these criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the RGC0402FTC100R and RE0402FRE07100RL are active production components with identical electrical and mechanical specifications within the 0402 package footprint. Both components carry ROHS3 compliance and MSL 1 ratings, confirming suitability for standard PCB assembly processes. The RE0402FRE07100RL from YAGEO is designated as the manufacturer-recommended substitute and maintains full compatibility with applications originally specified for the RGC0402FTC100R. Selection between these parts may be based on availability, supply chain considerations, or procurement preferences, as electrical performance and reliability characteristics are equivalent.

Frequently Asked Questions (FAQ)

Q: Can RE0402FRE07100RL be used as a direct replacement for RGC0402FTC100R?

A: Yes. Both components share identical resistance value (100 Ohms), tolerance (±1%), power rating (0.063W), package (0402), composition (thick film), temperature coefficient (±50ppm/°C), and operating range (-55°C to 155°C). RoHS3 and MSL 1 compliance are equivalent.

Q: Are there dimensional differences between these parts?

A: The seated height differs slightly: RGC0402FTC100R maximum 0.016" (0.40mm) versus RE0402FRE07100RL maximum 0.015" (0.37mm). Both remain within 0402 package specifications and present no PCB assembly or clearance concerns.

Q: Do both parts meet automotive qualification requirements?

A: The RGC0402FTC100R carries AEC-Q200 automotive rating. The RE0402FRE07100RL does not list automotive qualification in the provided specifications. Applications requiring explicit AEC-Q200 certification should retain the RGC0402FTC100R.

Q: What is the moisture sensitivity level for these components?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions and compatibility with standard storage and handling procedures.

Q: Are these parts RoHS compliant?

A: Both components are ROHS3 compliant, meeting current environmental and hazardous substance restrictions for electronic components.