RG3216V-1540-C-T5 Equivalent & Substitute Parts

Part Overview

The RG3216V-1540-C-T5 is a 154 Ohm ±0.25% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W (1/4W) power dissipation. This component is designed for automotive applications and carries AEC-Q200 qualification with anti-sulfur coating. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility while meeting automotive reliability standards.

Substiute Parts

RG3216V-1540-C-T5

SusumuIn Stock: 665RG3216V-1540-C-T5 Datasheet

Current PartRFQ

RG3216V-1540-B-T5

SusumuIn Stock: 1049RG3216V-1540-B-T5 Datasheet

UpgradeRFQ

RG3216V-1540-P-T1

SusumuIn Stock: 879RG3216V-1540-P-T1 Datasheet

UpgradeRFQ

RG3216V-1540-W-T1

SusumuIn Stock: 974RG3216V-1540-W-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG3216V-1540-C-T5 is determined by the following critical parameters that must remain constant across all equivalent parts:

Fixed Parameters (Non-Negotiable):

• Resistance value: 154 Ohms
• Package format: 1206 (3216 Metric)
• Power rating: 0.25W (1/4W)
• Composition: Thin Film
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Anti-sulfur coating: Required
• Physical dimensions: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Height seated (max): 0.020" (0.50mm)
• Terminations: 2
• RoHS3 compliance: Required
• MSL rating: 1 (Unlimited)

Variable Parameter (Allows Substitution):

• Tolerance: The main part specifies ±0.25%. Substitute parts with tighter tolerances (±0.1%, ±0.05%, ±0.02%) are electrically and mechanically compatible and represent upgrades in precision performance.

All identified substitute parts maintain identical electrical characteristics, mechanical compatibility, and automotive compliance ratings while offering improved tolerance specifications.

Parameter Comparison

Engineering Selection Recommendations

The RG3216V-1540-C-T5 is classified as obsolete. All three substitute parts are active products manufactured by Susumu and provide direct functional equivalence with enhanced precision specifications.

RG3216V-1540-B-T5 offers ±0.1% tolerance, representing a 2.5x improvement in tolerance specification while maintaining all electrical and mechanical parameters. This part is suitable for applications requiring improved accuracy over the original ±0.25% specification.

RG3216V-1540-W-T1 provides ±0.05% tolerance, delivering a 5x improvement in tolerance specification. This part addresses applications with moderate precision requirements and is available in active production status.

RG3216V-1540-P-T1 delivers ±0.02% tolerance, representing a 12.5x improvement in tolerance specification. This part is specified for high-precision applications requiring the tightest tolerance control and is maintained in active production.

All substitute parts maintain identical AEC-Q200 automotive qualification, anti-sulfur coating, RoHS3 compliance, and operating temperature range. Direct PCB footprint compatibility is assured through identical 1206 package dimensions and termination configuration. Selection between substitute options depends solely on the tolerance requirement of the target application circuit.

Frequently Asked Questions (FAQ)

Q: Can RG3216V-1540-B-T5, RG3216V-1540-P-T1, and RG3216V-1540-W-T1 be used interchangeably with RG3216V-1540-C-T5?

A: Yes. All substitute parts share identical resistance value (154 Ohms), package format (1206), power rating (0.25W), composition (thin film), temperature coefficient (±5ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive qualification (AEC-Q200). The substitute parts feature tighter tolerance specifications, which represent functional upgrades. PCB footprint compatibility is guaranteed.

Q: What is the primary difference between the main part and the substitute parts?

A: The main part RG3216V-1540-C-T5 specifies ±0.25% tolerance and is obsolete. The substitute parts offer improved tolerance specifications (±0.1%, ±0.05%, or ±0.02%) and are all active products. All other electrical and mechanical characteristics remain identical.

Q: Are the substitute parts available in the same packaging format?

A: The main part RG3216V-1540-C-T5 packaging format is not specified in the provided data. All substitute parts are supplied in Tape & Reel (TR) packaging. Verify packaging compatibility with your procurement requirements.

Q: Do all substitute parts maintain AEC-Q200 automotive qualification?

A: Yes. All substitute parts carry AEC-Q200 qualification, anti-sulfur coating, and are suitable for automotive applications across the -55°C ~ 155°C operating temperature range.

Q: Which substitute part should be selected for my application?

A: Selection depends on the tolerance requirement of your circuit design. If the original ±0.25% tolerance is acceptable, RG3216V-1540-B-T5 (±0.1%) provides a cost-effective upgrade. For applications requiring tighter tolerance control, RG3216V-1540-W-T1 (±0.05%) or RG3216V-1540-P-T1 (±0.02%) are specified accordingly.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts are RoHS3 compliant with MSL rating 1 (Unlimited), matching the compliance profile of the main part.